Recording onto TAPE
The tape deck of the system can record any
music source including CD and radio.
4 4
AUX
T
APE
TAPE REC
CD
MD
TAPE
TUNER FM /AM
Main unit only
1
Make preparation for recording.
See steps 1 and 3 to 5 of "Recording
CD onto TAPE" (pages 22 & 23).
2
Select the source to be recorded.
: Press the CD 6 key.
CD
: Press the MD 6 key.
MD
Radio : Press the TUNER FM/AM key.
AUX component : Press the AUX key.
If a CD or MD has already been loaded
in advance, it starts to be played auto-
matically now. press the 7STOP key
to stop it.
3
When the source to be recorded
is ready, press the TAPE REC key.
Example : Recording CD onto TAPE
C D
EX. BASS
38
EN
7 STOP
VOLUME /
MULTI-CONTROL
MENU
6
SET
6
23
STEREO
Tape recording indicator
4
Start playing the source to be re-
corded.
To stop recording :
Press the 7STOP key.
To let recording pause :
When the TAPE REC key is pressed during
recording, recording pauses after leaving a
no-sound section of 4 seconds. To resume
recording from record-pause mode, press
the TAPE REC key again.
Tip for recording CD or MD onto
tape
When the cassette deck is put to record-
pause mode, the start of tape recording can
be started in synchronism with the start of
playback of the CD or MD source. (Sync re-
cording)
(1)
Put the CD player or MD recorder of
the system to pause (play-pause)
mode.
(2)
Select the track to be recorded first
by pressing the 4 or ¢ key.
The CD player or MD recorder enters
pause (play-pause) mode at the be-
ginning of the selected track.
(3)
Press the TAPE REC key twice. The
cassette deck enters record-pause
mode after leaving a no-sound sec-
tion of 4 seconds.
(4)
Start playback of the CD or MD.
÷ The cassette deck of the system is capable
of recording only the normal (TYPE I) tapes.
High (TYPE II) and metal (TYPE IV) position
tapes cannot be used.