Change Password; Select Rating Level - Kenwood DVF-S500 Instruction Manual

Change Password

1 During stop mode, press SET UP key on the re-
mote.
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the RATINGS SETUP, then press
the ENTER key to access the sub features
3 Press Cursor up/down (5/∞) keys on the remote
to select PASSWORD, then press the Cursor
right (3) key to access the sub features
4 press the ENTER key to select CHANGE.
5 Enter old password, new password and enter
new password again to confirm, then press the
ENTER key. (The password set at the time of ship-
ping from the factory is "0000".)
6 Press Cursor left (2) key on the remote to return
to previous menu.
7 Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
8 Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
%
This part of DVD rating lets you determine how your
player will react discs that contain movies that are rated
(in the U.S.A. the Motion Pictures Association of
America rates movies as G, PG, PG-13, etc.).

Select RATING level

1 During stop mode, press SET UP key on the re-
mote.
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the RATINGS SETUP, then press
the ENTER key to access the sub features
3 Press Cursor up/down (5/∞) keys on the remote
to select RATING, then press the Cursor right
(3) key to access the sub features
4 Press Cursor up/down (5/∞) keys on the remote
to select specific level, then press the ENTER
key.
5 Enter the password, then press the ENTER key.
The password set at the time of shipping from the
factory is "0000".
Refer to the item "Change Password" when the
password is to be changed.
6 Press Cursor left (2) key on the remote to return
to previous menu.
7 Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
8 Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
21
Set Up functions
DVF-S500 (Y)
%