Connecting The Ac Adapter; Connecting The Am Loop Antenna - Kenwood C-707I Instruction Manual

Microcomputer malfunctions

Connecting the AC adapter

Use only the AC-120400A that comes with this product.
To ensure optimum operation of the system, locate the AC adapter as far away as possible from the system.
AC power cord
To AC wall outlet
AC adapter cautions

Connecting the AM loop antenna

The antenna supplied with the system is for indoor use. Place it as far away as possible from the system, your TV set, the
speaker cords, AC adapter and the power cord, and point it in the direction that provides the best reception.
Connecting the antenna cord
Connect the AM antenna cord to the [AM] and
[MGND] terminals, as shown on the right.
Connecting the FM indoor antenna
The antenna supplied with the system is a basic antenna for indoor use. For stable signal reception, the use of an outdoor
antenna (commercially available) is recommended. Disconnect the indoor antenna fi rst before connecting an outdoor
antenna.
If the system does not operate normally or shows display errors, reset the
microcomputer. (Page 81)
Do not cover or wrap the AC adapter with cloth, blanket or other material.
Doing so will result in fi re due to excessive heat accumulating in the adapter.
1
Connecting the System
2 3
English
13