Download Print this page
Edelbrock 641570 Installation Instructions Manual
Edelbrock 641570 Installation Instructions Manual

Edelbrock 641570 Installation Instructions Manual

Edelbrock corporation firewall forward fuel line kits installation instructions for 1996-2000 honda civic equipped with b-series engine

Advertisement

Quick Links

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and
procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation,
it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at:
1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at Edelbrock@Edelbrock.com.
IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation
will void your warranty and may result in poor performance and engine or vehicle damage.
DESCRIPTION: This Russell Performance Firewall Forward Fuel Line kit includes all necessary parts to replace your factory rubber fuel lines from the
fuel filter to the fuel rail and from the fuel rail to the factory steel return line with a high performance Edelbrock aluminum fuel rail, Proflex/Twist-Lok,
or Proclassic hoses, and AN fittings. The kit is designed to fit 1996-2000 Honda Civic chassis equipped with a Honda DOHC B-Series engine, and will
provide increased fuel flow for high performance applications. Kit #641570 features Proflex/Twist-Lok hoses and red and blue anodized fittings, while
kit #641573 features Proclassic hose and fittings with a black and clear finish.
KIT CONTENTS:
❑ 1
Fuel Rail. High Flow, Honda B-Series Engines (PN 4796)
❑ 1
Adjustable Fuel Pressure Regulator (PN 1728)
❑ 5ft Proflex Hose (-6AN) (641570 Only)
❑ 3ft Twist-Lok Hose (-4AN) (641570 Only)
❑ 5ft Proclassic Hose (-6AN) (641573 Only)
❑ 3ft Proclassic Hose (-4AN) (641573 Only)
❑ 1
Honda Banjo to -6AN Male Adapter Fitting
❑ 2
Straight Hose End (-6AN)
❑ 1
90° Swivel Hose End (-6AN)
❑ 1
45° Swivel Hose End (-6AN)
❑ 1
Straight Twist-Lock Hose End (-4AN) (641570 Only)
TOOLS REQUIRED:
❑ Hand Tools, Standard and Metric
❑ Standard and Metric Allen Keys
❑ AN Wrenches
WARNING: EXPOSED FUEL AND OIL WILL BE PRESENT DURING THIS INSTALLATION. WHEN WORKING AROUND
GASOLINE OR OIL, ALWAYS WORK IN A WELL VENTILATED AREA, AND KEEP ALL OPEN FLAMES, SPARKS, AND OTHER
SOURCES OF IGNITION AWAY FROM THE WORK AREA. FAILURE TO DO SO CAN RESULT IN A FIRE OR EXPLOSION.
MAKE SURE TO DISCONNECT YOUR BATTERY TO AVOID THE POTENTIAL FOR SPARKS IN THE WORK AREA!
NOTE: Certain Honda vehicles have security protected audio systems. If your vehicle is equipped with a factory audio system, be
sure to have the security code written down prior to disconnecting the battery. See Honda Service Manual for additional details.
WARNING: SOME PROCEDURES IN THIS INSTALLATION MAY REQUIRE THE VEHICLE TO BE RAISED ON JACKSTANDS OR A LIFT. WHEN
RAISING A VEHICLE, MAKE SURE THE VEHICLE IS ON LEVEL GROUND AND SUPPORTED SECURELY BY JACKSTANDS.
NEVER WORK UNDER A VEHICLE THAT IS SUPPORTED BY A JACK ONLY!
Catalog #641570, 641573
Rev. 5/07 - RS/mc
For 1996-2000 Honda Civic Equipped with B-Series Engine
❑ 1
❑ 2
❑ 1
❑ 2
❑ 2
❑ 1
❑ 1
❑ 1
❑ 1
❑ 2
❑ 6
❑ AN Fitting Assembly Lubricant
❑ Liquid Teflon Thread Sealant
❑ Fuel Pressure Gauge (For Fuel Pressure Adjustment)
CAUTIONS AND WARNINGS
Page 1
FIREWALL FORWARD FUEL LINE KITS
Catalog #641570, 641573

INSTALLATION INSTRUCTIONS

Straight Hose End (-4AN) (641573 Only)
#4 Hose End Cover (Red, 641570 Only)
#4 Hose End Cover (Polished, 641573 Only)
-8AN to -6AN Adapter Fittings (with o-rings)
-6AN Dry-Sump Fittings (with o-rings)
-6AN Block-Off Plug (with o-ring)
-6AN Female to -4AN Male Coupling
-6AN Female Coupling Nut
#4 Hose Clamp
12mm Aluminum Crush Washers
Tie-Wraps
©2007 Edelbrock Corporation
Brochure #63-641570

Advertisement

loading

Summary of Contents for Edelbrock 641570

  • Page 1: Installation Instructions

    DESCRIPTION: This Russell Performance Firewall Forward Fuel Line kit includes all necessary parts to replace your factory rubber fuel lines from the fuel filter to the fuel rail and from the fuel rail to the factory steel return line with a high performance Edelbrock aluminum fuel rail, Proflex/Twist-Lok, or Proclassic hoses, and AN fittings.
  • Page 2: Before Beginning Installation

    Keep the banjo or service bolt loose until all pressure is relieved. Figure 1 - Relieving Fuel Pressure at Fuel Filter Catalog #641570, 641573 Rev. 5/07 - RS/mc BEFORE BEGINNING INSTALLATION INSTALLATION PROCEDURE Remove the banjo bolt from the fuel filter and disconnect the fuel supply line from the fuel filter.
  • Page 3 NOTE: Use fitting assembly lube when assembling hose ends. Use AN wrenches if available, and DO NOT OVERTIGHTEN FITTINGS. See Russell catalog or contact the Edelbrock Tech Line for details. Unscrew the socket of the hose end from the nipple. Hold the socket carefully in a vice using soft jaws and insert the hose into the socket by turning it counter-clockwise.
  • Page 4: Final Checks

    Attach the 45° hose end side of this line onto the -6AN dry-sump fitting on the inlet side of the fuel pressure regulator (See Fig. 7) . Catalog #641570, 641573 Rev. 5/07 - RS/mc Figure 7 - Fuel Rail to Regulator Line Install the hose end side of the -4AN hose onto the -4AN coupling on the return port of the fuel pressure regulator.
  • Page 5 NOTES Catalog #641570, 641573 ©2007 Edelbrock Corporation Rev. 5/07 - RS/mc Page 5 Brochure #63-641570...
  • Page 6 ® Russell Performance • A Division of Edelbrock Corporation 2700 California St. • Torrance, CA 90503 Tech-Line: 1-800-416-8628 • E-Mail: Edelbrock@Edelbrock.com Catalog #641570, 641573 ©2007 Edelbrock Corporation Rev. 5/07 - RS/mc Page 6 Brochure #63-641570...

This manual is also suitable for:

641573