Saving.the.active.route; Navigating.a.saved.route; Recalculating.the.route; Deleting.all.saved.routes - Kenwood DNX7200 Instruction Manual

Saving the Active Route
From the Menu page, touch
Routes > Save Active Route.
Navigating a Saved Route
From the Menu page, touch
Routes Navigate Saved
>
you want to navigate.
Recalculating the Route
From the Menu page, touch
Routes > Recalculate Route.
Deleting All Saved Routes
From the Menu page, touch
Routes > > Delete All Saved
Stopping Your Route
From the Menu page, touch Stop. Then touch Yes.
DNX7200 GPS Navigation Instruction Manual
tools > My Data >
tools My Data
> >
Route. Touch the route
tools > My Data >
tools > My Data >
Routes.
Adding a Detour to a Route
If you need to take a detour from your current route,
open the Menu page and touch Detour.
1 kilometer, 5 kilometers, or
the distance of the detour. For example if a road sign
indicates that the street is closed for the next five
kilometers, touch 5 kilometers
system recalculates your route for the next five
kilometers.
Detour by Road(s) In Route—select roads in your route
to avoid. For example, if the highway ramp is closed,
select the ramp in the list of roads. The navigation
system recalculates your route to avoid that ramp.
Detour by Traffic Event on
an FM Traffic Receiver, you can detour around traffic
events.
Remove All Detours—touch to remove any detours you
have entered for the route.
c  e r
reatinG and ditinG outes
10 kilometers—select
in the list. The navigation
Route—if you are using
EN-7