System Requirements ANT24-0700 Install Guide 2.4GHz (802.11b/g) Networking Device with Detachable SMA or TNC Antenna Connector Package Contents D-Link ANT24-0700 Magnetic Base with 1.5m 2.4GHz Omni-Directional Extension Cable Indoor Antenna SMA to TNC Adapter Mounting Kit Installation Guide D-Link Systems, Inc.
Page 3
ANT24-0700 Install Guide Hardware Overview Extension Cable Connects to the SMA Magnetic Base connector on your The magnetic base wireless device. allows you to set the antenna on a flat surface or attach to a wall. SMA to TNC Adapter Converts a SMA connector to a TNC connector type.
Page 4
Antenna Installation ANT24-0700 Install Guide Carefully remove the antenna from the package and identify the optimal location for the antenna. The antenna can be placed on a flat surface such as a desktop or mounted on the wall. Do not put the antenna in an enclosure such as a cabinet or closet, or directly on or next to large appliances or a 2.4GHz cordless phone base.
Page 5
ANT24-0700 Install Guide Antenna Installation A. Unscrew the magnetic base from the antenna. B. Identify a mounting location. Use a pencil to mark the position of the two holes using the stencil supplied with your mounting kit. C. Use a 5/16” drill bit to drill a hole in both marked locations.
Page 6
D-Link products. Simply disconnect ® your existing antenna and connect the cable from the ANT24-0700 to the SMA connector on your D-Link ® product. The ANT24-0700 also includes an SMA to TNC connector for attaching the ANT24-0700 to products with a TNC connector.
1. Keep the number of walls and ceilings to a minimum. Each wall or ceiling can rob your D-Link wireless product of 3-90 ft. of range. Position your access points, wireless routers, and computers so that the number of walls or ceilings is minimized.