Power Source; How To Install Batteries; Battery Notice; Ac Adaptor Connection - VTech Non-Stop Girl User Manual

POWER SOURCE

®
The VTech Non-Stop Girl™ learning product operates on 4 "AA" size batteries
(UM-3/LR6) or a standard 9V

HOW TO INSTALL BATTERIES

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit
and open it.
3. Insert 4 "AA" batteries (UM-3/LR6) as illustrated.
DO NOT USE RECHARGEABLE BATTERIES in
this unit. (The use of alkaline batteries is
recommended for best performance.)
4. Close the battery cover.

BATTERY NOTICE

• Install batteries correctly observing the polarity (+,
-) signs to avoid leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from equipment
when you are not going to use the unit for a long
time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
NOTE: If the unit suddenly stops working or the sound becomes weak, turn the unit off and
remove the batteries. After several minutes, replace the batteries and turn the product
back on. If the problem persists it may be caused by weak batteries. Please install a
new set of batteries and try the unit again.

AC ADAPTOR CONNECTION

Use a standard 9V
1. Make sure the unit is OFF.
2. Locate the adaptor jack on the back of the unit.
3. Insert the adaptor plug into the adaptor jack.
4. Plug the adaptor into a wall outlet.
5. Turn the unit ON.
NOTE: If the unit suddenly stops working or the sound seems weak, it may be the result of the
adaptor connection. Turn the unit off and unplug the adaptor from the unit for several
minutes. Next, plug the adaptor back in and turn the unit on. If the problem continues,
please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-800-
267-7377 in Canada.
300mA AC/DC center-positive
300mA AC/DC center-positive
2
adaptor.
adaptor.