To Begin Play - VTech Magic Paws User Manual

WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
NOTE: If for any reason the program/activity stops working, please follow
these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada, and a service representative will be happy to help you.
CRIB ATTACHMENT
To attach The VTech
unfasten the velcro bow tie and attach to the side
of the crib.

TO BEGIN PLAY

1. Slide the PLAYTIME/OFF/SOOTHING
MODE SELECTOR SWITCH to the
PLAYTIME MODE (
MODE (
You will hear a short tune. The LIGHT-UP
PAWS will flash with the sound.
2. To adjust the volume, slide the HIGH / LOW
VOLUME CONTROL SWITCH to the (
position for HIGH VOLUME or the (
position for LOW VOLUME.
®
Magic Paws™ to the crib,
) or SOOTHING
) position to turn the unit ON.
)
)
4