Rmon Event Control - Dell PowerEdge M420 Configuration Manual

RMON Event Control

Use the RMON Events Control page to define RMON events. Events are
used by RMON alarms to force some action when a threshold is crossed for a
particular RMON counter. The event information can be stored in a log
and/or sent as a trap to a trap receiver.
To display the page, click Statistics/RMON → RMON → Event Control in
the navigation panel.
Figure 15-17. RMON Event Control
Adding an RMON Event
To add an event:
1 Open the RMON Event Control page.
2 Click Add.
The Add an Event Entry page displays.
420
Monitoring Switch Traffic