Front Panel Description - B&K 5 Series II User Manual

4
1
1. Headphone Jack - Stereo headphones having a standard ¼" (6.3mm) stereo jack can be connected to the
headphone output. The Preamplifier Tuner must be on and in HEADPHONE Mode for proper headphone
operation.
2. Front panel Display - The Preamplifier Tuner display is a 16 character alphanumeric fluorescent display. It
will display current status of the Preamplifier Tuner and any changes being performed.
3. Front Panel Buttons - The following table outlines front panel button operation.
ON/STANDBY
PRESET
ENTER
SAVE
DOWN
SOURCE
LOUDNESS
LEVEL
4. Volume control - For controlling system volume. Turning the rotational encoder control clockwise increas-
es the volume level, counterclockwise decreases the volume level. The volume knob is also used to change
other Tuner and preamplifier settings when in the menu system.
5. Master power switch - Shuts off all power to the Preamplifier Tuner. Normal operation of the
Preamplifier Tuner requires the master power switch to remain on. Use the ON/STANDBY button for
daily ON and OFF. Only turn the Preamplifier Tuner off with the master power switch when not using it for an
extended period of time.

FRONT PANEL DESCRIPTION

B & K C O M P
ON / STANDBY PRESET ENTER SAVE
t
2
Toggles the preamplifier in and out of standby mode, (ON or OFF).
Steps through audio presets for instant preset recall.
Press ENTER to recall preset.
Confirm Selection
Press ENTER and PRESET simultaneously to access the menu system.
Save a preset.
Press ENTER to confirm.
Allows radio tune - (down) or tune + (up) of the AM/FM tuner.
UP
When in menu, steps through menus, sources or characters.
Steps through source inputs.
Engages a loudness curve (high and low boosted) for low level listening.
Selects VOLUME, BALANCE, BASS or TREBLE level to be adjusted via the
rotational encoder knob.
O N E N T S , L T
TUNE DOWN TUNE UP SOURCE LOUDNESS
3
D .
LEVEL
R E F E R E N C E
MASTER
POWER
S T E R E O P R E A M P L I F I E R
4 5
S
5
2