Other Improvements - Akai MPC 2500 Operator's Manual Addendum

Other Improvements

1. DISCARD and EXTRACT functions use selection from the page the function is
initiated from.
∗ DISCARD and EXTRACT functions initiated in the TRIM page will apply
edits to the area between trim start and end points when [F1] (TRIM) is
selected.
∗ DISCARD and EXTRACT functions initiated in the LOOP page will apply
edits to the area between loop start and end points when [F2] (LOOP) is
selected.
2. Added ability to route assignable mix outs in mono.
3. Step recording now follows TC SWING% setting.
4. Copied event data is kept between STEP EDIT and GRID EDIT mode.
∗ When copying events in STEP EDIT mode, the copied data will remain in
memory when switching to GRID EDIT mode.
5. When a Q-Link knob or fader is moved in SLIDER mode, the page is
automatically changed to the moved Q-Link's page.
6. In the L/OUT page of MIXER mode, each individual OUT is now available as a
single mono output, or as a stereo pair.
7. Folder load function loads sequence files when no .ALL file is found.
MPC 2500 Manual Addendum v1.1
10