Related Manuals for Zhone 6219-X1
Summary of Contents for Zhone 6219-X1
- Page 1 6219-X1 ADSL2+ 4–Port Router Users Guide Document Part Number: 830-02072-02 February 2010...
- Page 2 License (“GPL”), a copy of which is available at www.gnu.org/licenses. You may obtain a copy of such software, in source code form, from Zhone for a period of three years after our last shipment of the product by following the instructions at www.zhone.com/gplinfo.
-
Page 3: Important Safety Instructions
When the product is marked with the CE mark on the equipment label, a supporting Declaration of Conformity may be downloaded from the Zhone World Wide Web site at www.zhone.com. FCC Part 15 Declaration An FCC Declaration of Conformity may be downloaded from the Zhone World Wide Web site at www.zhone.com. 6219-X1 Router Users Guide... - Page 4 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The authority to operate this equipment is conditioned by the requirement that no modifications will be made to the equipment unless the changes or modifications are expressly approved by the responsible party.
- Page 5 The user may make no repairs to the equipment. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. If the site has specially wired alarm equipment connected to the telephone line, ensure the installation of the modem does not disable the alarm equipment.
- Page 6 CANADA - EMI NOTICE: This Class B digital apparatus meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la classe B respecte toutes les exigences du règlement sur le matérial brouilleur du Canada. Japan Notices This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI).
-
Page 7: Table Of Contents
Table of Contents Important Safety Instructions..........................3 CE Marking ..............................3 FCC Part 15 Declaration..........................3 About This Guide..............................11 Style and notation conventions ........................11 Typographical conventions ........................12 Acronyms ...............................12 Contacting Global Service and Support......................14 Chapter 1 Introduction System Requirements ............................15 Package Contents ..............................16 Safety Instructions..............................16 Front Panel.................................17 Back Panel .................................18... - Page 8 Chapter 4 Advanced Setup WAN ...................................31 Create a New WAN Connection — ATM PVC Configuration.................32 Connection Type | PPPoA ..........................33 Connection Type | PPPoE ..........................36 Connection Type | MAC Encapsulation Routing ....................39 Connection Type | IP over ATM........................42 Connection Type | Bridging..........................44 Remove Function............................46 Finish Function...............................47 LAN Local Area Network (LAN) Setup .......................48...
- Page 9 Chapter 5 Wireless Basic ................................75 Security ................................77 MAC Filter ..............................81 Wireless Bridge..............................82 Advanced ...............................84 Station Info ..............................85 Diagnostics.................................86 Management ..............................87 Settings ................................87 Backup Settings............................87 Update or Restore User Settings.......................88 Restore Default............................88 System Log ................................89 Configure System Log ...........................90 SNMP .................................91 TR-069 Client ..............................91 Access Control ..............................92 Services .................................92...
-
Page 11: About This Guide
About This Guide This guide is intended for use by installation technicians, system administrators, and network administrators. It explains how to install the 1611-A3 router. Style and notation conventions The following conventions are used in this document to alert users to information that is instructional, warns of potential damage to system equipment or data, and warns of potential injury or death. -
Page 12: Typographical Conventions
CASE Brackets [ ] indicate optional syntax. Command Syntax Vertical bar | indicates the OR symbol. Acronyms The following acronyms are related to Zhone products and may appear throughout this manual: Table 1: Acronyms and their descriptions Acronym Description ADSL... - Page 13 Simple Network Management Protocol TFTP Trivial File Transfer Protocol VoIP Voice over IP VoWi-Fi Voice-over-Wifi Virtual Private Network Wired Equivalent Privacy Wi-Fi Wireless Fidelity (IEEE 802.11 wireless networking) Wi-Fi Multimedia Wi-Fi Protected Access Zhone Management System 6219-X1 Router Users Guide...
-
Page 14: Contacting Global Service And Support
Contacting Customer Service and Technical Support Customer service and technical support for this Zhone device are provided by your Internet Service Provider. 6219-X1 Router Users Guide... -
Page 15: Chapter 1 Introduction
Chapter 1 Introduction The 6219-X1 ADSL 2+ 4 port WiFI is an easily installed router which delivers the performance needed for multimedia applications This User’s Guide will show you how to set up the router, and how to customize its configuration to get the most out of this product. -
Page 16: Package Contents
Package Contents In addition to this document, your package should arrive containing the following: • 6219-X1 ADSL 2+ 4 port router • 12V 1 A power adapter • RJ-11 telephone cable • RJ-45 Ethernet cable • User Manual / Quick Guide Safety Instructions Place your modem on a flat surface close to the cables in a location with sufficient ventilation. -
Page 17: Front Panel
Front Panel Mode INDICATION Solid Boot-up successful green Router is booting up or there is problem with internal Power On Self Power Solid red Test (POST )diagnostic The router may not be turned on. Check if the power adapter is No light connected to the modem and plugged in Solid... -
Page 18: Back Panel
Back Panel NOTE: The below port descriptions are listed as they appear on the back panel from left to right. Port Description RJ-11 cable connects to telephone (no external splitter necessary; Phone unit has internal splitter). RJ-11 cable connects between telephone and the LINE port using a Line splitter (not included) if needed. -
Page 19: Hardware Installation And Pc Setup
Chapter 2 Hardware Installation and PC Setup Overview This chapter provides basic instructions for connecting the router to a computer or a LAN and to the Internet using DSL. The first part provides instructions to set up the hardware, and the second part describes how to prepare your PC for use with the router. -
Page 20: Mounting The Router
Mounting the Router The router can be mounted on the wall with two screws. Mounting can be done on wall material including concrete, wood, or drywall. Select an appropriate location free from obstructions or any possible interference. Make sure the cables can be easily attached to the router without strain. The illustration below shows how to mount the router horizontally on a wall. -
Page 21: Configuring Your Computer
Configuring Your Computer Prior to accessing the router through the LAN or the USB port, note the following necessary configurations— • Your PC’s TCP/IP address: 192.168.1.__( the last number is any number between 2 and 254) • The router’s default IP address: 192.168.1.1 •... -
Page 22: Windows Xp
Windows XP In the Windows taskbar, click the Start button and point to Settings and then click Network Connections. In the Network Connections window, right click on the Local Area Connection icon and click on Properties. Listed in the Local Area Connection window are the installed network components. Make sure the box for Internet Protocol (TCP/IP) is checked and then click Properties. -
Page 23: Chapter 3 The Web User Interface
Chapter 3 The Web User Interface The 6219-X1 combination modem/router has a Wide Area Network (WAN) connection which connects to your phone line. This connects to your Internet Service Provider (ISP) via the phone line. The four Local Area Network (LAN) connections are where you plug in your local computers to the router. -
Page 24: Summary
Summary Access the general information of the router by clicking Summary under Device Info. This screen shows details of the router such as the version of the software, bootloader, LAN IP address, etc. It also displays the current status of your DSL connection as shown below— 6219-X1 Router Users Guide... -
Page 25: Wan Info
WAN Info Display the WAN status report from the router by clicking WAN under Device Info. The graphic below shows the screen when a WAN connection is set up. LAN Statistics Display LAN statistics by clicking LAN under Statistics The reset statistics button zeros out the counters so that you can more easily determine if the errors are still occurring. -
Page 26: Wan Statistics
WAN Statistics Display WAN statistics by clicking WAN under Statistics. The reset statistics button zeros out the counters so that you can more easily determine if the errors are still occurring. ATM Interface Statistics Display ATM statistics by clicking ATM under Statistics. 6219-X1 Router Users Guide... -
Page 27: Adsl Statistics
ADSL Statistics Display ADSL statistics by clicking ADSL under Statistics. Information contained in this screen is useful for troubleshooting and diagnostics of connection problems. 6219-X1 Router Users Guide... -
Page 28: Adsl Ber Test
ADSL BER Test The ADSL Bit Error Rate (BER) test determines the quality of the ADSL connection. The test is performed by transferring idle cells containing a known pattern and comparing the received data with this known pattern to check for any errors The BER Test reflects the ratio of error bits to the total number transmitted. -
Page 29: Route
Route Access the routing status report from the router by clicking Route under Device Info. Display the ARP status report by clicking ARP under Device Info. ARP (Address Resolution Protocol) maps the IP address to the physical address, labeled HW Address (the MAC address) and identifies computers on the LAN. -
Page 30: Dhcp
DHCP Access the DHCP Leases screen by clicking DHCP under Statistics. This page shows the computers, identified by the hostname and MAC address that have acquired IP addresses by the DHCP server with the time that the lease for the IP address is up. 6219-X1 Router Users Guide... -
Page 31: Chapter 4 Advanced Setup
Chapter 4 Advanced Setup This section contains advanced setup settings. Configure the WAN settings as provided by your ISP. For each type of WAN connection, you create a new ATM Permanent Virtual Channel (PVC) identifier. The PVC is made up of a Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI). -
Page 32: Create A New Wan Connection - Atm Pvc Configuration
Create a New WAN Connection — ATM PVC Configuration To add a new connection for the WAN interface, click Add. The ATM PVC Configuration screen follows as seen below. The ATM PVC Configuration screen allows you to configure an ATM PVC identifier (VPI and VCI) and select a service category. Find out the following values from your ISP before you change them: •... -
Page 33: Connection Type | Pppoa
Connection Type | PPPoA Point to Point Protocol over ATM (PPPoA) Point-to-Point Protocol is a protocol for serial data transmission that is used to carry IP data between your ISP and your computer. PPPoA encapsulates PPP frames for ATM Adaption Layer 5 (AAL5). PPPoA offers authentication, encryption and compression. - Page 34 In the Network Address Translation Settings page, make changes as directed by your ISP, and then click Next. When the settings are complete, the next screen shows a WAN Setup – Summary screen displaying the WAN configurations made. 6219-X1 Router Users Guide...
- Page 35 Make sure that the settings on the WAN Setup - Summary screen match the settings provided by your ISP. If all settings are correct, click Save to save these settings; if not, click Back to make any modifications. If you want to change any item after saving, click Edit to make any modifications.
-
Page 36: Connection Type | Pppoe
Connection Type | PPPoE Point to Point Protocol over Ethernet (PPPoE) encapsulates PPP frames in Ethernet frames. Select the type of network protocol and encapsulation mode over the ATM PVC that your ISP has instructed you to use, then click Next In the Connection Type page, select PPP over Ethernet (PPPoE), then click Next In the PPP Username and Password page, enter a username and password and change other parameters as directed by your ISP, and then click Next. - Page 37 In the Network Address Translation Settings page, make changes as directed by your ISP, and then click Next. When the settings are complete, the next screen shows a WAN Setup – Summary screen displaying the WAN configurations made. 6219-X1 Router Users Guide...
- Page 38 Make sure that the settings on the WAN Setup - Summary screen match the settings provided by your ISP. If all settings are correct, click Save to save these settings; if not, click Back to make any modifications. If you want to change any item after saving, click Edit to make any modifications.
-
Page 39: Connection Type | Mac Encapsulation Routing
Connection Type | MAC Encapsulation Routing MAC Encapsulation Routing (MER) allows the router to have routing on the LAN, but have bridging on the WAN connection to the ISP. Select the type of network protocol and encapsulation mode over the ATM PVC that your ISP has instructed you to use, then click Next In the Connection Type page, select MAC Encapsulation Routing (MER), then click Next In the WAN IP Settings page, change parameters as directed by your ISP, and then click... - Page 40 In the Network Address Translation Settings page, make changes as directed by your ISP, and then click Next. When the settings are complete, the next screen shows a WAN Setup – Summary screen displaying the WAN configurations made. Make sure that the settings on the WAN Setup - Summary screen match the settings provided by your ISP.
- Page 41 6219-X1 Router Users Guide...
-
Page 42: Connection Type | Ip Over Atm
Connection Type | IP over ATM Internet Protocol over ATM (IPoA) supports extending across classic IP subnet boundaries using IP routing and IP forwarding. Select the type of network protocol and encapsulation mode over the ATM PVC that your ISP has instructed you to use, then click Next In the Connection Type page, select IP over ATM (IPoA), then click Next In the WAN IP Settings page, change parameters as directed by your ISP, and then click Next. - Page 43 In the Network Address Translation Settings page, make changes as directed by your ISP, and then click Next. When the settings are complete, the next screen shows a WAN Setup – Summary screen displaying the WAN configurations made. Make sure that the settings on the WAN Setup - Summary screen match the settings provided by your ISP.
-
Page 44: Connection Type | Bridging
Connection Type | Bridging Select the type of network protocol and encapsulation mode over the ATM PVC that your ISP has instructed you to use, then click Next In the Connection Type page, select Bridging, then click Next 6219-X1 Router Users Guide... - Page 45 The Bridge Service screen appears allowing you disable bridge service if desired. Check or uncheck Enable Bridge Service, and then click Next. When the settings are complete, the next screen shows a WAN Setup – Summary screen displaying the WAN configurations made. 6219-X1 Router Users Guide...
-
Page 46: Remove Function
Click Save to save the settings. After the settings are saved, the below screen will follow displaying the WAN settings that you made with the option to Add or Remove any of the connections that you have made. Remove Function If you want to delete a connection from the listed WAN setup, click the Remove check box next to the item, then click Remove. -
Page 47: Finish Function
Finish Function When satisfied with the settings click Finish. After selecting the Finish button, the DSL Router Reboot screen will appear. At this point, the router will reboot to save the changes made. 6219-X1 Router Users Guide... -
Page 48: Lan Local Area Network (Lan) Setup
LAN Local Area Network (LAN) Setup You can configure the DSL Router IP address and Subnet Mask for the LAN interface to correspond to your LAN’s IP Subnet. If you want the DHCP server to automatically assign IP addresses, then enable the DHCP server and enter the range of IP addresses that the DHCP server can assign to your computers. - Page 49 The following DSL Router Reboot screen appears after Save / Reboot is clicked. 6219-X1 Router Users Guide...
-
Page 50: Ethernet Mode
Ethernet Mode Ethernet mode allows you to select the speed of your Ethernet connection. Modes include—auto, 100 full, 100 half, 10 full and 10 half. If you select auto then the router will use the common mode with which all the connected interfaces can operate. 6219-X1 Router Users Guide... -
Page 51: Nat
You can configure Virtual Servers, Port Triggering, and DMZ Host when NAT (Network Address Translation) is enabled. Virtual Servers A virtual server allows you to direct incoming traffic from the WAN side to a specific IP address on the LAN side. The following figure shows the screen that allows you to configure your virtual server(s). - Page 52 Either select a service (by using the Select a Service dropdown) or select a custom server (by entering the IP address of the server in the Custom Server text box). You can select a Service or make a new one. Enter the IP address of the LAN side PC in the Server IP Address text box.
-
Page 53: Port Triggering
Port Triggering Click Add to add Port Triggering to your Internet application. The NAT – Port Triggering screen appears when you click Add allowing you to select the application that you want to set the port settings for. After a selection has been made, click Save / Apply to save your settings. -
Page 54: Dmz Host
DMZ Host You can define the IP address of the DMZ Host on this screen. Enter the IP address and click Save / Apply. 6219-X1 Router Users Guide... -
Page 55: Mac Filtering
MAC Filtering MAC filtering can forward or block traffic by MAC address. You can change the policy or add settings to the MAC filtering table in the MAC Filtering Setup screen. If you click Change Policy, a confirmation dialog allows you to verify your change. To add a setting to the MAC filtering table, enter the Source and Destination MAC address, and select protocol type, frame direction, and WAN interface. - Page 56 When you Save / Apply the IP filter, the MAC Filtering Setup screen appears. The MAC Filtering Setup screen lists the MAC filters, including filters which were added from the previous screen. You can view, add or delete MAC filters. The Remove button appears only when you have an existing IP filter already set up.
-
Page 57: Parental Control
Parental Control Use the Parental Control feature to restrict the days and times a particular device is allowed to access the Internet. To setup parental controls Click Add to set up the restrictions. The Add Parental Control screen appears. Enter a User Name to identify the target of the restrictions. Enter the MAC address of the network adapter to be restricted, and, optionally, another MAC address. -
Page 58: Url Filter
URL Filter Access to websites can be blocked by creating a URL filter. Two types of lists can be created, either an exclude or include list. Click Add to continue to the next screen to enter the URL address. In URL Address enter the URL address; in Port Number enter the port number and click Save / Apply. -
Page 59: Quality Of Service
Quality of Service You can configure the Quality of Service to apply different priorities to traffic on the router. Queue Config In the Queue Config page you can enable a queue for a network interface. Each interface associated with QoS is allocated three queues. Lower Queue Precedence values denote a higher priority for the queue, so “1”... -
Page 60: Qos Classification
Select the interface from the Queue drop down. Set the priority for the queue from the Queue Precedence drop down Click Save/Apply. QoS Classification You can configure the Quality of Service to apply different priorities to traffic on the router. The Add Network Traffic Class Rule screen allows you to add a network traffic class rule. - Page 61 To add a rule: In the Quality of Service—QoS Classification screen, click Add. In the Add Network Traffic Class Rule screen give a name to this traffic class. Assign a priority level—low, medium, and high—to this traffic class. Select an IP precedence from the 0-7 range. Enter an IP Type of Service from the following selections—...
-
Page 62: Routing
Routing Under the Routing heading you assign a default gateway, create a routing table (in Static Route), create routing policy rules, and activate Routing Information Protocol (RIP) on the device. Default Gateway You can enable automatic assigned default gateway on the Routing – Default Gateway screen. By default, the Enable Automatic Assigned Default Gateway checkbox is checked. -
Page 63: Static Route
Static Route To add a routing table use the Static Route page. A maximum of 32 entries can be configured. Click Add. Enter the route information and then save and apply your configurations. 6219-X1 Router Users Guide... -
Page 64: Policy Route
Policy Route The policy routing feature allows the administrator to have more control over how packets should flow through the modem and into their networks. The feature allows administrator to route IP packets according to their Source Interface; Source/Destination IP address/subnets; IP Protocols; Source/Destination Ports to specific Gateway address and/or Gateway Interfaces. -
Page 65: Dsl
Select the appropriate protocol and define other parameters for the routing rule: • Source and/or Destination address and/or Subnet Mask • UDP/TCP Source or Destination port. • Gateway address or Interface (These can be Active PVCs or Port Mapping Groups) Click Save/Apply. -
Page 66: Capability
Capability The following are included under Capability: • Bitswap Enable • SRA Enable (Seamless Rate Adaptation) Do not change these settings unless so directed by your ISP. DSL Advanced Settings Do not change the DSL Advanced Settings unless so directed by your ISP. To view the DSL Advanced Settings screen, click Advanced Settings button on the DSL Settings screen. - Page 67 Click Tone Selection. The frequency band of ADSL is split up into 256 separate tones, each spaced 4.3125 kHz apart. With each tone carrying separate data, the technique operates as if 256 separate modems were running in parallel. The tone range is from 0 to 31 for upstream and from 32 to 255 for downstream.
-
Page 68: Interface Group
Interface Group The interface group feature allows you to open ports to allow certain Internet applications on the WAN side to pass through the firewall and enter your LAN. To use this feature, mapping groups should be created. To create a new mapping group: Click Add button If you need to edit an entry, then click Edit for that group. - Page 69 Enter a unique Group name. Select interfaces from the available interface list and add them to the grouped interface list using the arrow buttons to create the required mapping of the ports. Click Save/Apply. 6219-X1 Router Users Guide...
-
Page 70: Ipsec
IPSec Internet Protocol Security (IPSec) allows you to set up secure tunnel access between two IP addresses. Encryption and key exchange make this a secure way to access remote networks. Contact your ISP for the necessary information to correctly configure this connection. Click Add New Connection to access the IPSec Settings screen to enter your configurations. - Page 71 The Show Advanced Settings button at the bottom of the screen provides additional encryption settings. 6219-X1 Router Users Guide...
-
Page 72: Certificate
Certificate Use the Certificate screen to add, view, or remove a certificate for use by a peer to verify your identity. A maximum of four certificates can be stored. You can add a certificate either by creating a new one or importing an existing one from a location where one is stored. Note: Certificates are used with TR-069. - Page 73 The Create new certificate request screen allows you to request a new certificate request. Follow the screens that appear to configure a new certificate. Click Apply to submit the request. If you have a certificate already, you can simply import the certificate by pasting the certificate content and private key into the space provided.
-
Page 74: Trusted Ca
Trusted CA The trusted certificate authority (CA) allows you to verify the certificates of your peers. The Trusted CA (Certificate Authority) Certificates screen also allows you to view certificates. You can store up to 4 certificates. To Import a certificate Click on Import Certificate Enter the certificate name in the Certificate text box. -
Page 75: Chapter 5 Wireless
Chapter 5 Wireless The router’s wireless feature can be configured to your needs. Sections covered under the wireless section include • Basic • Security • MAC filter • Wireless bridge • Advanced • Quality of service and station info. Basic The Wireless –... - Page 76 enabled (the selection is unchecked) the access point sends out WPA-PSK information for WiFi handsets. When you enable a wireless bridge, you can also see the other wireless bridges by SSID and BSSID (MAC address). 6219-X1 Router Users Guide...
-
Page 77: Security
Security The Wireless – Security screen allows you to select the network authentication method and to enable or disable WEP encryption. Note that depending on the network authentication that is selected, the screen will change accordingly so additional fields can be configured for the specific authentication method. Network authentication methods include the following—... - Page 78 • 802.1X — requires mutual authentication between a client station and the router by including a RADIUS-based authentication server. Information about the RADIUS server such as its IP address, port and key must be entered. WEP encryption is also enabled and the encryption strength must also be selected.
- Page 79 difference is that the password is entered manually. A group re-key interval time is also required. • WPA2 (Wi-Fi Protected Access 2) — second generation WPA which uses AES (Advanced Encryption Standard) instead of TKIP as its encryption method. Network re-authorization interval is the time in which another key needs to be dynamically issued.
- Page 80 • WPA2-PSK (Wi-Fi Protected Access 2 – Pre-Shared Key) — suitable for home and SOHO environments, it also uses AES encryption and requires you to enter a password and a re- key interval time. • Mixed WPA2 / WPA — useful during transitional times for upgrades in the enterprise environment, this mixed authentication method allows “upgraded”...
-
Page 81: Mac Filter
• Mixed WPA2 / WPA-PSK — useful during transitional times for upgrades in the home or SOHO environment, a pre-shared key must be entered along with the group re-key interval time. Both TKIP and AES are also used. MAC Filter The MAC filter screen allows you to manage MAC address filters. -
Page 82: Wireless Bridge
From one of the MAC Restrict Mode radio buttons, select Disabled, Allow or Deny. Click MAC Address to add the MAC address; enter the MAC address in the MAC Address text box, then click Save/Apply. Wireless Bridge In the Wireless — Wireless Bridge screen, you can select the mode for the router, either access point or wireless bridge. - Page 83 If you have chosen to enable access point, in the Remote Bridges MAC Address text box(es) MAC address(es) for the bridge(s). If you have chosen access point Refresh only allowed… 6219-X1 Router Users Guide...
-
Page 84: Advanced
Advanced The Advanced page configures advanced features of the wireless LAN interface. Advanced features include: • Band — a default setting at 2.4GHz – 802.11g • Channel — 802.11b and 802.11g use channels to limit interference from other devices. If you are experiencing interference with another 2.4Ghz device such as a baby monitor, security alarm, or cordless phone, then change the channel on your router. -
Page 85: Station Info
individual throughput speeds of each client on the network) can improve by up to 25% in 802.11g only networks and up to 75% in mixed networks comprised of 802.11g and 802.11b equipment. • 54g Mode — 54g is a Broadcom Wi-Fi technology. •... -
Page 86: Diagnostics
Diagnostics The diagnostics screen allows you to run diagnostic tests to check your DSL connection. The outcome will show test results of three connections— • Connection to your local network • Connection to your DSL service provider • Connection to your Internet service provider There are two buttons at the bottom of the page—Test and Test with OAM F4—which allow you to retest if necessary. -
Page 87: Management
Management The Management section gives you access to certain setups for the purpose of maintaining the system, including backing up the configurations, viewing system log, maintaining access control, updating software, etc. Settings The page options under Settings provide you with the ability to save configurations to a file, restore configurations from a file and to restore the factory default configuration. -
Page 88: Update Or Restore User Settings
Update or Restore User Settings To load a previously saved configuration file onto your router: From the Settings – Update Settings page, click Browse to find the file on your computer. Click Update Settings. The router will restore settings and reboot to activate the restored settings. Restore Default Restore Default will delete all current settings and restore the router to factory default settings. -
Page 89: System Log
Click OK when the pop-up window appears confirming that you want to restore factory default settings to your router. The router will restore the default settings and reboot. System Log The System Log dialog allows you to view the System Log and configure the System Log options. To view the System Log click View System Log to check the log file. -
Page 90: Configure System Log
Configure System Log If the log is enabled, the system will log selected events based on their level. The log levels are • Emergency • Alert • Critical • Error • Warning • Notice • Informational • Debugging. All events above or equal to the selected log level will be logged and displayed. If the selected mode is Remote or Both, events will be sent to the specified IP address and UDP port of a remote system log server. -
Page 91: Snmp
SNMP SNMP (Simple Network Management Protocol) provides a means to monitor status and performance as well as set configuration parameters. It enables a management station to configure, monitor and receive trap messages from network devices. TR-069 Client The router includes a TR-069 client WAN management protocol with default values configured. To enable the TR-069 client protocol: Select Enable. -
Page 92: Access Control
Access Control You can enable or disable some services of your router by LAN or WAN. If no WAN connection is defined, only the LAN side can be configured. Services Services that can be enabled or disabled on the LAN/WAN are •... -
Page 93: Ip Addresses
IP Addresses Web access to the router may be limited when Access Control Mode is enabled. To add the IP address to the IP address list: Click Add. Select Enabled to enable Access Control Mode. To assign the IP address of the management station that is permitted to access the local management services, enter the IP address in the IP Address text box. -
Page 94: Passwords
Passwords Access the Passwords screen under the Access Control section to change a password. Select an account and enter the current password and the new password and then click on the Save / Apply button. 6219-X1 Router Users Guide... -
Page 95: Update Software
Update Software If your ISP releases new software for your router, follow these steps to perform an upgrade: Obtain an updated software image file from your ISP. Enter the path to the image file location or click on the Browse button to locate the image file. -
Page 96: Reboot Router
Reboot Router Clicking Save/Reboot saves all the configurations you have made, then reboots the router using the new configuration information. 6219-X1 Router Users Guide... -
Page 97: Chapter 6 Troubleshooting
Chapter 6 Troubleshooting The Router Is Not Functional Check to see that the power LED is green and the network cables are installed correctly. Refer to the quick start guide for more details. Check to see that the LAN and Status LEDs are green. Check the settings on your PC. -
Page 98: The Status Led Is Always Off
The Status LED is Always Off Make sure you have DSL service. You should receive notification from your ISP that DSL service is installed. You can usually tell if the service is installed by listening to the phone line: you will hear some high-pitched noise. If you do not hear high-pitched noise, contact your ISP. -
Page 99: Nslookup
Nslookup You can use the nslookup command to determine the IP address associated with an Internet site name. You specify the common name, and the nslookup command looks up the name in on your DNS server (usually located with your ISP). If that name is not an entry in your ISP’s DNS table, the request is then referred to another higher-level server, and so on, until the entry is found. -
Page 101: Appendix A - Glossary
Appendix A – Glossary Term Description 802.11 A family of specifications for wireless LANs developed by a working group of the IEEE. This wireless Ethernet protocol, often called Wi-Fi. 10BASE-T A designation for the type of wiring used by Ethernet networks with a data rate of 10 Mbps. - Page 102 Broadband A telecommunications technology that can send different types of data over the same medium. DSL is a broadband technology. Broadcast To send data to all computers on a network. DHCP Dynamic Host Configuration Protocol DHCP automates address assignment and management. When a computer connects to the LAN, DHCP assigns it an IP address from a shared pool of IP addresses;...
- Page 103 but if something happens to your engine, you are protected. The firewall in the router is very similar. Only the connections that you allow are passed through the firewall. These connections normally originate from the local network, such as users web browsing, checking e- mail, downloading files, and playing games.
- Page 104 Local Area Network. A network limited to a small geographic area, such as a home or small office. Light Emitting Diode An electronic light-emitting device. The indicator lights on the front of the device are LEDs. MAC address Media Access Control address The permanent hardware address of a device, assigned by its manufacturer.
- Page 105 Point-to-Point Protocol A protocol for serial data transmission that is used to carry IP (and other protocol) data between your ISP and your computer. The WAN interface on the device uses two forms of PPP called PPPoA and PPPoE. See PPPoA, PPPoE.
- Page 106 suite of protocols. Telnet An interactive, character-based program used to access a remote computer. While HTTP (the web protocol) and FTP only allow you to download files from a remote computer, Telnet allows you to log into and use a computer from a remote location. TFTP Trivial File Transfer Protocol A protocol for file transfers, TFTP is easier to use than File Transfer...
- Page 107 Virtual Path Identifier Together with the Virtual Circuit Identifier (VCI), the VPI uniquely identifies a VC. Your ISP will tell you the VPI for each VC they provide. See VC. Wide Area Network Any network spread over a large geographical area, such as a country or continent.