Assigning A Hot Spare Drive; 3041E-R Raid Configuration; Set Raid Controller In Legacy Mode; Entering Raid Bios Utility - Acer AT310 F2 Service Manual

2.
You will see all the logical drives listed.
3.
Click on Home to go back to the configuration menu.

Assigning a Hot Spare Drive

4.
Select a free disk marked as UNCONF GOOD and listed under Physical Drives.
5.
Select Make Global HSP or Make Dedicated HSP options and then click on Go.
6.
Click on Home to go back to the configuration menu. You will see the disk marked
as Hot Spare in pink and listed under Physical Drives.
7.
Now you can reboot the system and install the Operating System. Select Exit, click
on Yes and press Ctrl+Alt+Del to reboot the system.

3041E-R RAID configuration

Set RAID Controller in Legacy Mode

NOTE. Currently, 3041E-R only supports Legacy mode. Please change PCI ROM Priority
setting from EFI Compatible ROM to Legacy ROM in BIOS Setup.
PCI ROM Priority

Entering RAID BIOS Utility

Please press CTRL-C when you see the RAID BIOS during POST. After POST finished, the
Adapter Selection page will show on the screen.

Loading Factory Default Setting

1.
Please press <Alt> + <N> to launch Global Properties.
2.
Select Restore Defaults please press <Enter>.
3.
Press <ESC> select Save changes then exit this menu and press <Enter>.
4.
The setting will change to default.

Creating a RAID Volume

1.
Select SAS3041E and press <Enter>.
2.
Select RAID Properties and press <Enter>.
3.
Select Create IM Volume to create RAID 1 and press <Enter>.
4.
Move selection to RAID Disk and press <+>, press <D> to create new array.
5.
Press <C> to create array.
6.
Select Save change then exit this menu and press <Enter>
7.
Press <ESC> 2 times and select Exit the configuration Utility and Reboot. Press
<Enter>.
[Legacy ROM]
68