Table Of Contents; Introduction; Setup; Battery Installation - Philips SRU4010 Owner's Manual

Table of Contents

Introduction ...................................................... 2
Setup ............................................................... 3
Battery Installation ....................................... 3
Battery Saver ............................................... 3
Code Saver ................................................. 3
Code Setup ................................................. 3
Button Functions ............................................... 4
Code Entry ....................................................... 5
Direct Code Entry ........................................ 5
Code Search ............................................... 6
Code Identification Feature .......................... 7
Sleep Timer ...................................................... 8
Product Operation ............................................ 9
Code List ....................................................... 10
Troubleshooting .............................................. 13

Introduction

Congratulations on your purchase of a Philips
Universal TV Remote Control. Philips Universal
Remotes let you replace a broken or lost remote
or combine more than one remote into one.
This remote control operates the common features
of most but not all models and brands of IR
Infrared Controlled TVs. This remote may
provide functions that are not available on your
TV. Some functions of your particular TV (e.g.
menu functions) may not be controlled by this
remote. In such cases, use the original remote
control for your equipment. Please use this manual
to become familiar with your Philips Universal TV
Remote. After you are familiar with your remote
the first thing you need to do is to install batteries
and setup your remote for your particular TV
brand.
Thank you for buying a Philips remote and we
hope it will give you many years of service.
2

Setup

Battery Installation

1. On the back of the remote,
push down on the tab and
lift the cover off.
2. Match the batteries to the +
and - marks inside the
battery case, then insert 2
AAA Alkaline batteries.
3. Press the battery cover
back into place.

Battery Saver

Your remote automatically turns off if the buttons are
depressed more than 30 seconds. This will save your
batteries should your remote get stuck in a place where
the buttons remain depressed (e.g., between the sofa
cushions).

Code Saver

You will have up to 10 minutes to change the batteries in
your remote without losing codes you have programmed.
However, do not press any buttons until batteries are
installed in the remote. If buttons are pressed without
batteries in the remote, all codes will be lost.

Code Setup

The CODE SEARCH button is used to setup the
remote. You can either setup the remote using the code
for your brand of product, from the code tables, or you
can search through the library of codes until you find a
code that works for your product.
CODE SEARCH
3