Advertisement
Quick Links
Note: Your Edelbrock Victor Series Race Headers include stainless steel evacuation tubes, O2 sensor bungs and collector
mounting tabs to be installed, if needed. Collector mounting tabs should be installed after primary tube tuning has been
completed. Evacuation tubes can be positioned on the collector where desired for best fit and hose routing. See the above
diagram for recommended installation.
©2003 Edelbrock Corporation
Qty.
Part No.
1
25-9214
1
25-9215
2
25-9216
16
36-0710
2
52-9711
2
54-6550
4
60-8541
4
68-6550
2
79-9719
8
79-9720
8
82-3600
16
82-5590
Toll-Free Tech Line: 1-800-416-8628
Tech E-Mail: edelbrock@edelbrock.com
EDELBROCK VICTOR SERIES DRAG RACE HEADERS
Description
Left Side Header
Right Side Header
Slip-on Merge Collector
3/8" - 16 x 1" Header Bolts (Header Flange)
O2 Sensor Bungs (SS)
Header Port Flange Gaskets (Fel-Pro)
5/16"-18 Grade C Lock Nuts (Collector)
5/16" - 18 x 1-1/2" Grade 8 Hex Bolt (Collector)
Evacuation Tubes (SS)
Collector Mounting Tabs (SS)
5/16" AN Washers (Collector)
3/8" Split Lock Washers (Header Flange)
EXHAUST FLOW
As the exhaust flow passes by the
tube, it creates a low pressure
area on the backside, which
translate into vacuum.
Edelbrock Corporation
2700 California Street
Torrance, CA 90503
Office: 310-781-2222
Catalog #6550
KIT CONTENTS
Rev. 4/03
Advertisement
