Table of Contents
Advertisement
Caution
To reduce the risk of severe burns, allow the projector to cool for at least 45
minutes before replacing the lamp.
To reduce the risk of injuries to fingers and damage to internal components,
use caution when removing lamp glass that has shattered into sharp pieces.
To reduce the risk of injuries to fingers and/or decreasing image quality by
touching the lens, do not touch the empty lamp compartment when the
lamp is removed.
This lamp contains mercury. Consult your local hazardous waste regulations
to dispose of this lamp in a proper manner.
Resetting Lamp Hours
If you replace the lamp after 1500 hours of operation, please proceed as follows within
10 minutes of power on.
OSD
Press the Exit button on the projector for 3
seconds to display the total used lamp time.
•
•
Maintenance
FUNCTION
Press the MENU button on the projector
during the lamp hour message. An
adjustment message will appear.
Press
or
to rest lamp hours or press
EXIT to leave.
Benq Corporation
21
Advertisement
Table of Contents
