Table of Contents
Advertisement
Item
Effect
PICTURE
Less
BRIGHTNESS
Darker
COLOR
Less
TINT
Reddish
SHARPNESS
Less
ADVANCED SETTINGS
Item
Effect
BLACK
EXTENSION
Less
INPUT
LEVEL
Less
GAMMA
Down
AGC
OFF
W/B HIGH R
Less
W/B HIGH G
Less
W/B HIGH B
Less
W/B LOW R
Less
W/B LOW G
Less
W/B LOW B
Less
Notes:
• Carry out "W/B" adjustment as follows.
1. Adjust the white balance of the bright sections using the "W/B HIGH R" , "W/B HIGH G" and "W/B HIGH B" settings.
2. Adjust the white balance of the dark sections using the "W/B LOW R" , "W/B LOW G" and "W/B LOW B" settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other's settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
Helpful Hint (
On the remote control unit, while the "ADVANCED SETTINGS" menu is displayed, if either the N button is pressed at any time
or the ACTION ( ) button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.
Adjustments
Adjusts the proper picture contrast.
More
Adjusts for easier viewing of dark pictures
such as night scenes and black hair.
Brighter
Adjusts color saturation.
More
Adjusts for natural fl esh tones.
Greenish
Adjusts picture sharpness.
More
Adjusts the dark shades of the image in gradation.
More
Adjustment of parts which are extremely bright and hard to see.
More
S+ CURVE*
1
*1 When "PICTURE MENU" is set to "DYNAMIC", GAMMA "S+ CURVE" can be
selected. When 2k1k signals are received with the Dual Link HD-SDI Terminal
Board (TY-FB11DHD), "S+ CURVE" cannot be selected.
Up
*2 When 2k1k signals are received with the Dual Link HD-SDI Terminal Board (TY-
FB11DHD), GAMMA "2.6" can also be selected.
Increases the brightness of dark signal automatically.
ON
Adjusts the white balance for light red areas.
More
Adjusts the white balance for light green areas.
More
Adjusts the white balance for light blue areas.
More
Adjusts the white balance for dark red areas.
More
Adjusts the white balance for dark green areas.
More
Adjusts the white balance for dark blue areas.
More
/
Normalization)
NORMALIZE
PICTURE Adjustments
Notes:
• "COLOR" and "TINT" settings cannot be
adjusted for "RGB/PC" input signal.
• You can change the level of each function
(PICTURE, BRIGHTNESS, COLOR, TINT,
SHARPNESS) for each PICTURE MENU.
• The setting details for STANDARD, DYNAMIC
and CINEMA respectively are memorized
separately for each input terminal.
• The "TINT" setting can be adjusted for NTSC signal
only during "VIDEO (S VIDEO)" input signal.
• In PICTURE, there is not a noticeable change
even when contrast is increased with a bright
picture or reduced with a dark picture.
Details
S CURVE
2.0
2.2
2.5
2.6*
2
29
Hide quick links:
Advertisement
Table of Contents
