Electrical Considerations; Power Supply Considerations - Intel BLKDZ68DB Technical Product Specification

2.5

Electrical Considerations

2.5.1

Power Supply Considerations

CAUTION
The +5 V standby line from the power supply must be capable of providing adequate
+5 V standby current. Failure to do so can damage the power supply. The total
amount of standby current required depends on the wake devices supported and
manufacturing options.
Additional power required will depend on configurations chosen by the integrator.
The power supply must comply with the indicated parameters of the ATX form factor
specification.
• The potential relation between 3.3 V DC and +5 V DC power rails
• The current capability of the +5 VSB line
• All timing parameters
• All voltage tolerances
For example, for a system consisting of a supported 95 W processor (see Section 1.4
on page 17 for a list of supported processors), 1 GB DDR3 RAM, one high end video
card, one hard disk drive, one optical drive, and all board peripherals enabled, the
minimum recommended power supply is 460 W. Table 31 lists the recommended
power supply current values.
Table 31. Recommended Power Supply Current Values
Output Voltage
Current
For information about
Selecting an appropriate power supply
3.3 V 5 V 12 V1
22 A 20 A 16 A
Refer to
http://support.intel.com/support/motherboards/desktop/sb
/CS-026472.htm
Technical Reference
12 V2 -12 V 5 VSB
16 A 0.3 A 1.5 A
55