+5 V Standby Power Indicator; Location Of The Standby Power Indicator - Intel BLKDX79TO Product Manual

Intel Desktop Board DX79TO Product Guide

+5 V Standby Power Indicator

CAUTION
If the AC power has been switched off and the standby power indicator is still lit,
disconnect the power cord before installing or removing any devices connected to the
board. Failure to do so could damage the board and any attached devices.
The Desktop Board's standby power indicator, shown in Figure 5, is lit when there is
standby power still present on the board even when the computer appears to be off.
For example, when this LED is lit, standby power is still present at the memory module
sockets and the PCI bus connectors.
Figure 5. Location of the Standby Power Indicator
For more information on standby current requirements for the Desktop Board, refer to
the Technical Product Specification at
h ttp://www.intel.com/products/motherboard/index.htm
1
24