Changing The Password For The Administrator; Setting Up Public User Mode - Brother 8085DN - DCP B/W Laser User Manual

Chapter 4
Changing the password for
the administrator
a
Press Menu, 1, 6.
16.Function Lock
a Lock OffiOn
Set Password
b Setup ID
Select ab or OK
b
Press a or b to choose Set Password.
Press OK.
c
Enter the registered four-digit password.
Press OK.
d
Enter a four-digit number for the new
password.
Press OK.
e
If the LCD shows Verify: re-enter the
new password.
Press OK.
f
Press Stop/Exit.
28

Setting up public user mode

4
Public user mode restricts the functions that
are available for public users. Public users do
not need to enter a password to access the
features made available through this setting.
You can set up one Public user.
a
Press Menu, 1, 6.
16.Function Lock
Lock OffiOn
a
Set Password
Setup ID
b
Select ab or OK
b
Press a or b to choose Setup ID.
Press OK.
c
Enter the administrator password.
Press OK.
d
Press a or b to choose Public.
Press OK.
e
Press a or b to choose Enable or
Disable for Copy.
Press OK.
After you have set Copy, repeat this
step for Scan, USB Direct and
PC Print.
When you have finished changing
settings press d or c to choose Exit
and press OK.
f
Press Stop/Exit.
4