Audio Subsystem Software; Audio Connectors And Headers; Figure 4. Back Panel Audio Connector Options - Intel blkdp43tf Technical Product Specification

Desktop board
Table of Contents

Advertisement

1.10.1

Audio Subsystem Software

Audio software and drivers are available from Intel's World Wide Web site.
For information about
Obtaining audio software and drivers
1.10.2

Audio Connectors and Headers

The board contains audio connectors on the back panel and audio headers on the
component side of the board. The front panel audio header provides mic in and line
out signals for the front panel. Microphone bias is supported for both the front and
back panel microphone connectors.
The front/back panel audio connectors are configurable through the audio device
drivers. The available configurable audio ports are shown in Figure 4.
NOTE
The back panel audio line out connector is designed to power headphones or amplified
speakers only. Poor audio quality occurs if passive (non-amplified) speakers are
connected to this output.
For information about
The location of the front panel audio header
The signal names of the front panel audio header
The back panel audio connectors
Item
Description
A
Line in
B
Line out
C
Mic in

Figure 4. Back Panel Audio Connector Options

Product Description
Refer to
Section 1.2, page 14
Refer to
Figure 10, page 42
Table 18, page 45
Section 2.2.1, page 41
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp43tf

Table of Contents