Removing The Processor; Installing And Removing Memory - Intel BLKDP35DPM Product Manual

Intel Desktop Board DP35DP Product Guide

Removing the Processor

For instructions on how to remove the processor fan heat sink and processor, refer to
the processor installation manual.

Installing and Removing Memory

NOTE
To be fully compliant with all applicable Intel SDRAM memory specifications, the board
requires DIMMs that support the Serial Presence Detect (SPD) data structure.
Desktop board DP35DP has four 240-pin DDR2 DIMM sockets arranged as DIMM 0 and
DIMM 1 in both Channel A and Channel B.
NOTE
Regardless of the memory configuration used (dual or single channel), Channel A,
DIMM 0 must always be populated. This is a requirement of the ICH9R Manageability
Engine feature.
34