Data Cable - Nokia E5-00 User Manual

Activate the remote SIM mode from the other device.
When the remote SIM mode is on in your device,
the standby mode. The connection to the wireless network is turned off, as indicated
by in the signal strength indicator area, and you cannot use SIM card services or
features requiring cellular network coverage.
When the wireless device is in the remote SIM mode, you can only use a compatible
connected enhancement, such as a car kit, to make or receive calls. Your wireless
device will not make any calls while in this mode, except to the emergency numbers
programmed into your device. To make calls from your device, you must leave the
remote SIM mode. If the device is locked, enter the lock code to unlock it.
To leave the remote SIM mode, press the power key, and select
mode.

Data cable

To avoid corrupting data, do not disconnect the USB data cable during data transfer.
Transfer data between your device and a PC
1 Insert a memory card in your device, and connect the device to a compatible PC
with the data cable.
2 When the device asks which mode to use, select
you can see your device as a removable hard drive in your computer.
3 End the connection from the computer (from the Unplug or Eject Hardware
wizard in Microsoft Windows, for example) to avoid damaging the memory
card.
To use Nokia Ovi Suite with your device, install Nokia Ovi Suite on your PC, connect
the data cable, and select PC Suite as the USB connection mode.
Connectivity
Remote SIM mode
Exit remote SIM
Mass storage. In this mode,
95
is displayed in