Audio Subsystem Software; Audio Connectors And Headers; Back Panel Audio Connector Options - Intel BLKDG41TX Technical Product Specification

Product specification
Table of Contents

Advertisement

1.10.1

Audio Subsystem Software

Audio software and drivers are available from Intel's World Wide Web site.
For information about
Obtaining audio software and drivers
1.10.2

Audio Connectors and Headers

The board contains audio connectors on the back panel and audio headers on the
component side of the board. The front panel audio header provides mic in and line
out signals for the front panel. Microphone bias is supported for both the front and
back panel microphone connectors.
The audio headers and connectors are configurable through the audio device drivers.
The available configurable back panel audio connectors are shown in Figure 4.
NOTE
The back panel audio line out connector is designed to power headphones or amplified
speakers only. Poor audio quality occurs if passive (non-amplified) speakers are
connected to this output.
For information about
The location of the front panel audio header
The signal names of the front panel audio header
The back panel audio connectors
Item
Description
A
Line in
B
Line out
C
Mic in
Figure 4. Back Panel Audio Connector Options
Product Description
Refer to
Section 1.2, page 14
Refer to
Figure 10, page 44
Table 16, page 47
Section 2.2.1, page 43
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Boxdg41txDg41tx

Table of Contents