Legacy Input/Output (I/O) Controller; Lan Subsystem; Lan Status Leds - Intel BLKD410PTL Product Manual

Product guide
Table of Contents

Advertisement

Intel Desktop Board D410PTL Product Guide

Legacy Input/Output (I/O) Controller

The legacy I/O controller provides the following:
One parallel port
One serial port
Serial IRQ interface compatible with serialized IRQ support for PCI systems
PS/2-style keyboard and mouse ports
Intelligent power management, including a programmable wake up event interface
PCI power management support
The BIOS Setup program provides configuration options for the legacy I/O controller.

LAN Subsystem

The LAN subsystem consists of the following:
Intel NM10 Express Chipset
Realtek RTL8103EL Ethernet Controller for 10/100 Mbits/s Ethernet LAN
connectivity
RJ-45 LAN connector with integrated status LEDs
Additional features of the LAN subsystem include:
CSMA/CD protocol engine
LAN connect interface that supports the ethernet controller
PCI bus power management
⎯ Supports ACPI technology
⎯ Supports LAN wake capabilities
LAN drivers are available from Intel's World Wide Web site at
http://downloadcenter.intel.com/.
Two LEDs are built into the RJ-45 LAN connector located on the back panel (see
Figure 3). These LEDs indicate the operating states of the LAN.
16
Figure 3. LAN Status LEDs

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D410ptl

Table of Contents