Troubleshooting - LG 32LP1DC Owner's Manual

Troubleshooting
The remote control
doesn't work
• Check to see if there is any object between the product and the remote
control causing obstruction.
• Are batteries installed with correct polarity (+ to +, - to -)?
° Correct remote operating mode set: TV, VCR etc2
° ]nstali new batteries.
* is the sleep timer set?
Power is su_enly
. Check the power controt settings Power interrupted
turned off
, No broadcast on station tuned with Auto off activated.
k._ j
r
The video function ,does not work,
No picture &
No sound
Picture appears
slowly after
switching on
No or poor color
or poor picture
Horizontal/ve_i-
cal bars or pic-
ture shaking
* Check whether the product is turned on,
. Try another channet. The problem may be with the broadcast.
* is the power cord inserted into wall power outlet?
- Check your antenna direction and/or location.
° Test the wall power outlet, plug another product's power cord into the outlet
where the product's power cord was plugged in.
* This is normal, the image is muted during the product startup process,
Please contact your service center, if the picture has not appeared after five
minutes,
° Adjust Cotor in menu option.
• Keep a sufficient distance between the product and the VCR.
° Try another channel. The problem may be with the broadcast
• Are the video cables installed properly?
• Activate any function to restore the brightness of the picture,
* Check for local interference such as an electrical appliance or power tool_
• Station or cable product experiencing problems, tune to another station.
Poor reception on • Station signal is weak, reorient antenna to receive weaker station.
some channels ° Check for sources of possible interference.
Lines or streaks
• Check antenna (Change the direction of the antenna).
in pictures
57