Using Starch Powder; Using Chlorine Bleach; Cleaning The Filter/ Draining Residual Water - Whirlpool AWE 6760 Instructions For Use Manual

6kg, 1000rpm, top loader washing machine, white awe 6760

Hide thumbs

Table Of Contents

Table of Contents

Using chlorine bleach

• Wash your laundry in the desired programme

(Cotton, Synthetics), adding an appropriate

amount of chlorine bleach to the SOFTENER

chamber (close the lid carefully).

• Immediately after end of programme, start the

"Rinse and Spin" programme to eliminate any

residual bleach smell; if you want, you can add

softener.

• Never put both chlorine bleach and softener into

the softener chamber at the same time.

CLEANING THE FILTER/

DRAINING RESIDUAL WATER

The washing machine is provided with a self-cleaning

pump. The filter keeps objects like buttons, coins, safetypins

etc. which have been left in the laundry.

We recommend to check and clean the filter regularly, at

least two or three times a year.

Especially:

• if the appliance is not draining properly or if it fails to

perform spin cycles.

• if the "Clean pump" indication lights up.

IMPORTANT: make sure the water has cooled before

draining the appliance.

Residual water must be drained also before transporting

the machine.

1. Unplug the washing machine.

2. Open the filter cover with a coin.

3. Place a bowl beneath it.

4. Turn the filter slowly anti-clockwise until the grip is

vertical; do not remove it as yet.

5. Wait until all the water has drained out.

6. Now unscrew the filter completely and extract it.

7. Clean the filter and the filter chamber.

8. Make sure the pump impeller (in the housing behind

the filter) is not obstructed.

9. Insert the filter again and screw it fully down in a

clockwise direction to the stop (until the grip is

horizontal).

10. Pour approximately one litre of water into the washing

machine via the drum and check that water does not

leak from the filter.

11. Close the filter cover.

12. Reconnect the washing machine.