• Select the source name for its appropriate input connector after turning on the projector.
Input connector
COMPUTER 1 IN
COMPUTER 2 IN
HDMI IN
USB (PC)
NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan
converter.
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
* When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:
Project an image to fill the screen and then press the AUTO ADJ. button on the remote control or the projector cabinet.
SOURCE button on the projector
cabinet
COMPUTER 1
COMPUTER 2
HDMI
USB DISPLAY
6. Installation and Connections
Button on the remote control
(COMPUTER 1)
(COMPUTER 2)
(USB DISPLAY)
105
HDMI