Setting The Timer - LG Spectrum² VS930 User Manual

4. Tap Snooze duration to open a dialog box to set the amount of time to
wait before sounding the alarm again if it is not dismissed. You can set
the alarm to ring repeatedly from 5 minutes up to 1 hour.
5. Tap Vibration to checkmark the setting and have the phone vibrate, in
addition to playing the ringtone.
6. Tap Alarm sound to select a ringtone for the alarm, then tap the OK
icon. The ringtone plays briefly when you select it.
7. Tap Puzzle lock to checkmark the setting, which requires you to wake up
enough to solve a simple puzzle to dismiss the alarm.
8. Tap Memo to enter a name for the alarm.
9. When you're finished, tap the Save icon.
When the alarm sounds
Tap the Stop icon or, if set, use the gesture feature of simply flipping
the device over to stop the alarm.
Tap the Snooze icon to stop the alarm for the snooze duration you
set.
NOTE If Puzzle lock is set to On, using the gesture feature of flipping the device over will
snooze the alarm instead of turning it off.

Setting the Timer

The Timer application can be used to alert you with an audible signal when
a set amount of time has passed.
1. Open the Alarm/Clock application and tap the Timer tab
2. Set the time by scrolling the Hour, Minute and/or Second on the time wheel.
3. Tap Vibration to checkmark the setting and have the phone vibrate when
the set time expires.
4. Tap Alert sound to select an alert tone for the timer, then tap the OK
icon.
5. Tap the green Start icon at the bottom of the screen. to begin the time
countdown.
6. Once the alarm sounds, tap the Stop icon to stop the timer.
Tools
157
.