International Symbols; Equipment - Echo SRM - 2400SB Operator's Manual

INTERNATIONAL SYMBOLS

Symbol
Symbol form/shape
description/application
Read and understand
Operator's Manual.
Wear eyes, ears and
head protection
Hot
Surface
Safety/Alert

EQUIPMENT

Before operation a complete check of the unit must be performed;
• Check unit for loose/missing nuts, bolts and screws. Tighten and/or
replace as needed.
• Inspect fuel lines, tank and area around carburetor for fuel leaks. DO
NOT operate unit if leaks are found.
• Inspect shield for damage and ensure that the cut-off knife issecurely
in place. Replace if either is damaged or missing.
• Check that the cutting attachment is firmly attached and in safe
operating condition.
• Check that front handle and shoulder strap/or shoulder/waist harness
are adjusted for safe, comfortable operation. See Assembly Section
for proper adjustment.
Symbol
Symbol form/shape
description/application
Fuel and oil mixture
Finger Severing
Wear hand
protection. Use
two handed.
DO NOT smoke
near fuel.
G T
RASS RIMMER
O
PERATOR
Symbol
Symbol form/shape
description/application
DO NOT allow
flames or sparks
near fuel.
Emergency stop
Engine choke
control.
Carburetor adjustment
- High speed mixture
Carburetor adjustment
- Idle speed
/B C
RUSH UTTER
' M
S ANUAL
Symbol
Symbol form/shape
description/application
Wear slip resistant
foot wear.
Ignition
ON/OFF
Primer bulb
Carburetor adjustment
- Low speed mixture
5