LG DLE2516 Owner's Manual page 20

If your local codes or ordinances permit the
connection of a frame-grounding conductor to the
neutral wire, use these instructions. If your local
codes or ordinances do not allow the connection of
a frame-grounding conductor to the neutral wire,
use the instructions under Section 1: Optional 3-
wire connection.
• If your local codes or ordinances do not allow the
connection of a frame-grounding conductor to the
neutral wire, use the instructions under this
section.
3-wire receptacle
EMA type 1O-3OR)
e plump tadrentedrmi_1s with
rong
3-wire plug _ 3/4 in. (1.9 cm)
pproved strain relief
rona" Ring terminals
'- _
_Neutral (white or center wire
mding
Neutral wire (white)
ground
connector
_parate ground
wire
l
Center terminal
block screw (silver)
Neutral grounding
wire (white)
Neutral grounding
wire (white)
Strain relief
External ground
connector
.
2.
.
4.
.
Connect neutral wire (white) of power cord to
center terminal block screw.
Connect ground wire of appliance and neutral
wire of power cord to center terminal block
screw.
Connect red and black wires to the left and right
terminal block screws.
Make sure the strain relief screw is tightened.
Be sure that all terminal block nuts are on tight
and power cord is in right position.
Connect a independent ground wire from external
ground connector to proper ground.
2O