Windows Nt 4.0/Lan Server (Tcp/Ip) Troubleshooting - Brother HL-6050DW - B/W Laser Printer Network User's Manual

5
Make sure that the lpr/lpd remote line printer service are running
on the host computer (refer to your host computer
documentation for information on how to do this).
6
If you are having trouble printing more than one job at a time, try
increasing the IP timeout using the SET IP TIMEOUT
command or using BRAdmin.
7
If text or PCL jobs are run together, try setting the service
(remote printer) with EOT set to string number 2 (<ESC>E). For
example:
SET SERVICE BRN_xxxxxx_P1 EOT 2
8
If PostScript jobs fail to print or are run together, try setting the
service (remote printer) with EOT set to string number 3
(control-D). For example:
SET SERVICE BRN_xxxxxx_P1 EOT 3
9
If the lines of a text file are staggered, make sure that you have
specified a remote printer (rp) name of TEXT in your /etc/
printcap file.
10
If you are using Sun Solaris V2.4 or earlier, there is a bug which
causes long print jobs to fail when using a print server. If you are
having trouble printing long jobs (over 1MB), add the line mx#0
to your etc/printcap file entry.
11
If you cannot print from DEC TCP/IP Service for VMS (UCX),
make sure that you have version 2.0B or later of this software,
because earlier versions will not work with Brother print servers.
Windows NT
Troubleshooting
If you are having trouble printing with Windows NT
Server, check the following:
1
Make sure that TCP/IP and TCP/IP print service are installed
and running on the Windows NT
server.
10 - 12 TROUBLESHOOTING
®
4.0/LAN Server (TCP/IP)
®
4.0 or LAN
®
system or the LAN Server file