Dell 7330dn - Laser Printer B/W System Administration Manual page 54

reprinted. To prevent the printer from printing two copies of the same check, you can set the
printer to begin printing the job from the point where the media jammed through the end of the
job, or cancel the job completely.
To configure the jam recovery setting, use one of the following methods:
The printer's control panel
Embedded Web Server
Jam Recovery Using Embedded Web Server
To configure jam recovery settings:
1. Launch your web browser.
2. Enter the printer's IP address in the browser Address field.
3. Click the Properties tab.
4. On the left navigation panel, expand the Security folder.
5. Select Printing Security Settings.
6. If prompted, enter your Admin or Key User name and password.
7. Under Jam Recovery Options, select one of the following options:
Reprint the jammed page and continue printing the rest of the job: After the jam
is cleared, the printer begins printing the job from the point where the media jammed,
including the jammed page, through the end of the job.
Do not reprint jammed page, but do continue printing the rest of the job: After
the jam is cleared, the printer cancels the rest of the print job.
8. Click the Save Changes button.
Dell 7330 Mono Laser Printer System Administrator Guide
5-3
Jam Recovery