Using QuickLook 2
The behavior of the Info Center/QuickLook button depends on the power state of the computer, as shown
in the following table.
Power state
Off
Hibernation
On
Sleep
NOTE:
QuickLook 2 is enabled at the factory. If you disable QuickLook 2 in the system BIOS, pressing
the Info Center/QuickLook button opens Info Center when the computer is on. Pressing the Info Center/
QuickLook button when the computer is off, in Hibernation, or in the Sleep state has no effect.
10
Chapter 3 Using HP QuickLook 2
Info Center/QuickLook button behavior
Opens QuickLook.
Opens QuickLook.
Opens Info Center.
No function.