E-Mail Options; Configuring General E-Mail Options Using Fabric Manager - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

E-Mail Options

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Select the Create Row icon.
Step 4
You see the Create Call Home Profile dialog box.
Select switches to send alerts.
Step 5
Enter the name of the profile.
Step 6
Select the message format, message size, and message severity level.
Step 7
Check the RMON check box in the AlertGroups section.
Step 8
Click Create to create the profile for the RMON-based alerts.
Step 9
Close the dialog box.
Step 10
E-Mail Options
You can configure the from, reply-to, and return-receipt e-mail addresses. While most e-mail address
configurations are optional, you must configure the SMTP server address for the Call Home
functionality to work.

Configuring General E-Mail Options Using Fabric Manager

To configure general e-mail options using Fabric Manager, follow these steps:
Select a switch in the Fabric pane.
Step 1
Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.
Step 2
You see the Call Home information in the Information pane.
Click the e-mail Setup tab.
Step 3
Figure 62-11
Select a switch in the Information pane.
Step 4
Enter the general e-mail information.
Step 5
Enter the SMTP server IP address type, IP address or name, and port.
Step 6
Click the Apply Changes icon to update the e-mail options.
Step 7
Cisco MDS 9000 Family Fabric Manager Configuration Guide
62-14
Call Home e-mail Setup Tab
Chapter 62 Configuring Call Home
OL-17256-03, Cisco MDS NX-OS Release 4.x