Fujitsu FPCR46001 User Manual page 67

4
Align the memory upgrade module with the component side up. Align the connector edge of the memory
upgrade module with the connector slot in the compartment. Be sure the alignment keys line up with those in
the slot.(Figure 29)
Memory Cover Screw
Figure 27. Removing the Memory COver Screw
5
Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and
into the connector until it lodges under the retaining clip. You'll hear a click when it is properly in place.
6
Replace the cover and reinstall the screws.
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK
O
NCE IT IS INSTALLED
MEMORY CAPACITY
,
YOU SHOULD LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM
.
61 - Memory Upgrade Module
Memory Cover
Figure 28. Opening the Memory Compartment
.