Switching On The Device For The First Time - Fujitsu FPCR34121 Operating Manual

First-time setup of your device
Switching on the device for the first time
Switchingon for thefirsttime
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use your device for the first time, the operating system
is pre-installed on the hard disk.
► During installation, follow the instructions on screen.
If a Windows operating system is installed on your device, you will find more
information on the system and drivers, help programmes, updates, manuals etc.
on the device or on the Internet at "http://ts.fujitsu.com/support".
18
► Switch on your device.
Fujitsu Technology Solutions