Storage; Replacement Parts - Echo ECS-2000 Operator's Manual

CLEANING AND MAINTENANCE
Continued
Replacing Saw Chain
Replace chain when cutters are too worn to sharpen. Only use
replacement chain noted in this manual. Always include new
drive sprocket when replacing chain. This will maintain proper
driving of chain.

STORAGE

If storing saw for more than 30 days, follow steps below.
1. Drain oil tank.
2. Remove and clean guide bar and chain. Clean guide bar
and chain by soaking in petroleum based solvent or mild
soap and water mixture.
3. Dry guide bar and chain.
4. Place chain in container filled with oil. This will prevent
rust.
5. Wipe a thin coating of oil over surface of guide bar.
6. Wipe off outside of saw body. Do this with soft cloth
dampened with a mild soap and water mixture.
7. Store chain saw
• in a high or locked place, out of children's reach
• in a dry place
• in a carrying case (part # 999888-00207) or with
scabbard over guide bar

REPLACEMENT PARTS

!
WARNING
WARNING ICON G 001
Use only replacement parts described in this
manual. Use of other parts could damage saw or
injure operator.
Purchase these parts from your local dealer.
Part Number
120374001
917045
16037500
917056
9998880016
Description
12" guide bar with kick guard
91VG chain, 45 drive links
16" guide bar with kick guard
91VG chain, 56 drive links
Kick guard
14
102514