Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 157

The command group includes a show option, --show -hacluster. When invoked on a member node,
this command displays the committed HA cluster configuration. When invoked on the group leader,
both defined and committed configuration data is displayed including the following:
•
•
•
•
Operands The cryptoCfg HA cluster configuration function has the following operands:
--help -hacluster
--create -hacluster
--delete -hacluster
--add -haclustermember
Fabric OS Command Reference
53-1001186-01
Encryption group name: user-defined name
Number of HA clusters in the existing encryption group
For each HA cluster:
-
HA cluster name and number of encryption engine entries
-
HA cluster Status: Committed or Defined
For each encryption engine member in the HA cluster:
-
EE WWN
-
EE slot number
-
EE status: online or offline
Displays the synopsis for the HA cluster configuration function. This
command is valid on all nodes.
Defines an HA cluster with a specified name and optionally associates up to
two encryption engines with the HA cluster. This command is valid only on the
group leader. The EEs must be members of the same encryption group as the
group leader on which this command is issued. This command fails if the
member nodes' IP addresses for the GbE Ports (I/O sync ports) are not
configured. The following operands are supported:
HA_cluster_name
Specifies the name for the HA cluster. The name can be up to 31 characters
long and include alphanumeric characters and underscores. White space,
hyphens, and other special characters are not permitted. This operand is
required.
node_WWN Specifies the WWN of the switch or chassis to which the encryption engine
belongs. This operand is optional; if omitted, only the HA cluster name is
defined. You may add EEs separately with the --add -haclustermember
command.
slot_number Specifies the encryption engine slot number on bladed systems.
Deletes the HA cluster with the specified name. This command is valid only
on the group leader. The following operand is required:
HA_cluster_name
Specifies the name of the HA cluster to be deleted.
Adds one or more encryption engine members to an already configured HA. A
maximum of two HA cluster members is currently supported. The EEs must
be part of the same encryption group as the node on which this command is
issued. This command is valid only on the group leader. The following
operands are required with the --add command:
'
2
cryptoCfg
129