HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Firmware Release Notes page 11

Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release Notes
Task-Options:
-g Get CSRs and generate a CSR data file
-G Get CSRs (even from switches with certificates)
-i Install Certificates from a data file
-l Licensed Product report compile and generate
Event-Log-file: -e event-log-file
This is the path\file-name of log file created and written to (or if it already
exists, appended to) with event/error data.
Data-file: -d data-file
This is the path\file-name of an input or output file
— If the task-option is Get-CSRs, the file is an output file created and
written to with CSR data.
— If the task-option is Install Certificates, data is read from it.
— If the task-option is Licensed Product report generation, the file is
written to.
Address-file: -a addr-file
This is the path\file-name of optional input file containing IP addresses or
aliases of fabrics to which sessions should be established. If this argument
is not provided, this data is read from the file indicated by environment
variable FABRIC_CONFIG_FILE if defined.
Address-Switch-IP: -A switch-addr
This is the IP address of the switch/fabric to which to connect for the
given task.
Log-Level: -L n
The argument n is a numeric value, 0-3, indicating the level of detail for
information logged to the event log file. This may be provided on the
command line using the -L argument when using interactive mode. This is
used primarily for debug purposes. Values and their meanings are as
follows: 0 = silent; 1 = Error only; 2 = Events + Errors; 3 = Debug-info +
Events + Errors.
Username: -u user-name
The argument user-name is the login used for the one switch IP/Name
given with the -A switch-name argument. If -u is used, a password must
also be provided via the -p argument.
PKI Certificate Installation Utility for Solaris
11