Hitachi 42HDS69 - 42" Plasma TV Operating Manual page 64

Setup
12. Select the Test button VOL
of the device to this command.
13. Use the CURSOR PAD
NEXT, then press the SELECT button to move on to
the next SETUP screen.
14. Use the CURSOR PAD
that connects to the video and audio output of the
A/V Receiver.
15. Use the CURSOR PAD
NEXT, then press the SELECT button to move on to
the next SETUP screen.
16. Use the CURSOR PAD
Receiver Source if you have connected the Monitor
Out and Optical Out to the A/V Receiver. Select "Not
Connected" if not used.
17. Use the CURSOR PAD
NEXT, then press the SELECT button to move on to
the next step.
18. If you would like to label your A/V Receiver Source,
use the CURSOR PAD
press the SELECT button to continue. Selecting
"No" will bypass the Source Labeling.
19. Use the CURSOR PAD
Receiver Sources.
20. Use the CURSOR PAD
Receiver Sources.
21. Use the CURSOR PAD
NEXT, then press the SELECT button to move on to
the next SETUP screen.
64
to check the response
, , and to highlight
or to select the TV Input
, , and to highlight
or to select the A/V
, , and to highlight
or to highlight "Yes", then
or to select your A/V
or to label your A/V
, , and to highlight
AV Net Setup Wizard : A/V Receiver Setup
Select the Test button. If device
responds to this command, proceed to
"Next". Otherwise, try another IR
Code Set number.
Brand Name Other
IR Code Set Other
Learning Mode
Test Button
POWER SOURCE 1 VOL
Back
Move IR Out
SEL
AV Net Setup Wizard : A/V Receiver Setup
Brand Name Other
IR Code Set Other
TV Input Settings
If you connect the video or audio
output of the A/V Receiver to this TV,
please select a TV Input.
TV Input Not Connected
Back
Move Change Input SEL Select
AV Net Setup Wizard : A/V Receiver Setup
Brand Name Other
IR Code Set Other
TV Input Not Connected
Monitor out Settings
If you connect the Monitor out or Optical out
to an A/V Receiver, please selcet
an A/V Receiver Source.
Monitor Out Not Connected
Optical Out Not Connected
Back
Move Change Input SEL Select
AV Net Setup Wizard : A/V Receiver Setup
Brand Name Other
IR Code Set Other
TV Input Not Connected
Monitor Out Not Connected
Optical Out Not Connected
Would you like to relabel the Source buttons?
Back No
Move SEL Select
AV Net Setup Wizard : A/V Receiver Setup
Source Settings
Source Name
Source 1 Satellite
Source 2 ----------
Source 3 ----------
Source 4 ----------
Source 5 ----------
Source 6 ----------
Source 7 ----------
Source 8 ----------
Source 9 ----------
Source 10 ----------
Back
Move Change Name SEL Select
Next
Next
Next
Yes
Next