NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 121

GS700AT Series Smart Switch Software Administration Manual
To configure Basic IGMP Snooping:
1. Click Switching > Multicast > Basic > IGMP Snooping Configuration. The Basic IGMP
Snooping Configuration screen displays:
Figure 4-25
The Basic IGMP Snooping Configuration screen contains the following fields:
IGMP Snooping Configuration
• IGMP Snooping Status – Select the IGMP Snooping status on the device. The possible
field values are:
– Enable – Enable IGMP Snooping on the device.
– Disable – Disable IGMP Snooping on the device.
Interface Settings
• VLAN ID – Displays the VLAN ID.
• Status – Select the IGMP Snooping status on the VLAN. The possible field values are:
– Enable – Enable IGMP Snooping on the VLAN.
– Disable – Disable IGMP Snooping on the VLAN.
2. Select the IGMP Snooping Status in the provided field.
3. Click Apply to update the device.
To configure IGMP Snooping on a VLAN:
1. Click Switching > Multicast > Basic > IGMP Snooping Configuration. The Basic IGMP
Snooping Configuration screen displays.
2. Select the VLAN ID entry in the Interface Settings table.
4-40
v1.0, March 2008
Configuring Switching Settings