Snmp-Server Group - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

snmp-server group

snmp-server group GROUP-NAME {v1 | v2c | v3 {auth | noauth | priv}} [ read READ-VIEW ] [
write WRITE-VIEW ] [notify NOTIFY-VIEW]
no snmp-server group GROUP-NAME
Syntax Description
GROUP-NAME
v1
v2c
v3
auth
noauth
priv
read READ-VIEW
write WRITE-VIEW
notify NOTIFY-VIEW
Default
Group
Name Version
initial SNMPv3
ReadGroup SNMPv1
ReadGroup SNMPv2c
WriteGroup SNMPv1
WriteGroup SNMPv2c
Command Mode
CLI Reference Guide
Use this command to configure a new SNMP group or a table that maps SNMP
users to SNMP views. Use the no form of the command to remove a specified
SNMP group.
Specifies the name of the group. The valid length for GROUP-NAME is 1 to 32
characters. The syntax is a general string that does not allow space.
Specifies that SNMPv1 (the least secure of the possible SNMP security models)
should be used for the group.
Specifies that SNMPv2c should be used for the group.
Specifies that SNMPv3 should be used for the group.
SMNPv3 is the most secure of the supported security models, as it allow explicit
configuration of the authentication characteristics.
Specifies authentication of a packet without encrypting it.
Specifies no authentication of a packet.
Specifies authentication of a packet with encryption.
(Optional) Specifies a read view for the SNMP group. The read-view argument
represents a string that is the name of the view that enables the display to show
only the contents of the agent.
(Optional) Specifies a write view for the SNMP group. The write-view argument
represents a string that is the name of the view that enables data entry to
configure the contents of the agent.
(Optional) Specifies a notify view for the SNMP group.The notify-view argument
represents a string that is the name of the view that enables a trap to be
specified.
The default settings of SNMP group are as shown below:
Security Level Read View Name
noauth restricted
noauth CommunityView
noauth CommunityView
noauth CommunityView
noauth CommunityView
Global configuration
Write View Name Notify View Name
None
None
None
CommunityView
CommunityView
snmp-server group
restricted
CommunityView
CommunityView
CommunityView
CommunityView
830