Epson U375 - TM B/W Dot-matrix Printer User Manual page 25

Paper inlet
PAPER LOAD switch
5. When using the take-up spool, follow the steps and the illustration
below.
a) Pull out the side of the take-up spool and insert the tip of the paper
roll into the groove on the spool as the illustration below.
b) Rotate the spool two or three times to secure the paper and reinsert
the side of the take-up spool as the illustration below.
c) Install the take-up spool in the printer.
6. Tear off the receipt paper on the cutter; then close the printer cover.
Note:
When the printer cover is open, the
inactive.
2 or
PAPER FEED
button is
Setting Up the Printer 1-17