Western Digital WDBABX0000NBK-NESN User Manual page 17

Step 2 - Connecting the Power Cable
1. If applicable, connect the power clip to the power cable plug.
The AC power adapter will vary, depending on your location. Some locations do
not require a power plug clip. Units sold in those locations will have a fixed power
plug. Refer to the illustration below.
EU/KO
US/JA/TW
Installing
2. Connect the power cable to the media player's DC connector, and then plug the
opposite end into an AC power outlet. The media player powers up
automatically.
Wait a few seconds for your TV to detect the media player. If it is not detected,
you may need to change the input source on your TV to HDMI or composite,
depending on your connection. Check the user documentation of your TV for
more information.
Once the media player is detected, the splash screen displays to indicate system
bootup, then the home screen of the user interface opens.
For more information, see "Using the Media Player Menu" on page 34.
US/JA/TW
Removing
WD TV Live/Live Plus HD Media Players
EU/KO
Installing Removing
GETTING STARTED – 13
User Manual