Front-Panel Controls; Using The On-Screen Display (Osd) - HP W2338h - 23" LCD Monitor User Manual

Front-Panel Controls

Control buttons are located on the lower right front of the monitor:
Icon Description
Power Turns the monitor on and to standby or sleep mode.
NOTE: The power button is located on the top or front of the monitor depending on the model.
Menu Opens, selects, or exits the OSD menu.
Volume Adjusts the volume level.
Source Chooses video input source from the computer.
– Navigates backward through the OSD menu and decreases adjustment levels.
Slider bar activates the OSD and moves quickly through the menu or submenu selected.
+ Navigates forward through the OSD menu and increases adjustment levels.
Auto Auto-adjusts the display to the ideal setting when the OSD is not active.
OK Enters the selected option.

Using the On-screen Display (OSD)

An On-screen display is an image superimposed on a screen picture, commonly used by monitors, televisions, VCRs,
and DVD players to display information such as volume, channel, and time.
1. If the monitor is not already on, press the Power button to turn on the monitor.
2. Touch the slider bar to enable the OSD menu, then press the Menu button. The OSD Main Menu displays.
3. To navigate through the Main or Sub-Menu menu, press the + (Plus) button on the monitor's front panel to scroll
up, or the – (Minus) button to scroll in reverse. With the OSD active, swiping (one horizontal movement across
the slider) from Minus to Plus results in steady movement to the top of the menu or sub-menu being displayed.
Then press the OK button to select the highlighted function.
With an adjustment scale active, swiping from Minus to Plus results in steady movement to the maximum
adjustment setting. If movement is stopped before the end of the slider, the adjustment level stays at the last
setting.
4. To adjust the scale of a selected item, swipe between the + and – buttons.
5. Select Save and Return.
If you don't want to save the setting, select Cancel from the Sub-Menu or Exit from the Main Menu.
6. Press the Menu button to exit the OSD.
NOTE: When a menu is displayed, if the buttons are untouched for 30 seconds (factory default), adjustments and
settings are saved and the menu closes.
User's Guide
Operating the Monitor
4–3