Main accessories:
Stand Support
Installation Steps:
1
Take out the main unit and the base stand
from the carton, Unscrew the 6 screws
(4
PCS
MPW4 x 12 / 2
PCS TP4 x 20A-HO
to remove the stand support from the
main unit.
3
Screw back the 6 screws which were
removed from step1 (4
2
PCS TP4 x 20A-HO
) to connect the
main unit and the stand support.
Main Unit
)
PCS
MPW4 x 12 /
Base Stand
Screw
(MPW4 x 20,4pcs)
(
TP4 x 20A-HO,2pcs
2
Connect the stand support and the base
stand with 4PCS of MPW4 x 20 screws.
Screw
)