Foot Stand Installation; Disconnecting The Stand; Using The Cable Organizer - HANNspree SK42TMNB User Manual

Foot Stand Installation

1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
n Install only with another person's
assistance.
n Make sure to distinguish between
the front and back of the stand when
assembling them.
2
Attach the foot stand as shown in the
illustration and secure it with the four
included screws. Please fasten with a cross
screw driver.

Disconnecting the Stand

1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from damage.
2
Remove the screws and detach the stand from the TV.

Using the Cable Organizer

Route the cables through the cable clamp as shown in the illustration below:
Installing the LCD TV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. Hannspree bears no
responsibility for improper mounting or mounting that results in accident or injuiry. You can ask a
qualified service personnel about using an optional bracket to mount the TV to the wall.
6
1
2
Y
Pb/Cb
Pr/Cr
SPDIF
L HDMI 2
R
DTV/TV
CABLE /ANTEN
SCART NA
COMPO
NENT VGA
VGA
AUDIO
3
AU DI
SC AR T
CO MP ON
EN T
VG A
VG A
AU DI