Nikon F75D - F75 QD = N75 35mm SLR Camera Body Only Instruction Manual page 24

Focus Area Mode
The F75/F75D's five focus areas cover a wide frame area. When the focus
mode is set to AF (page 44), you can select either Dynamic AF Mode with
Closest-Subject Priority, where the camera automatically selects the focus
area, Dynamic AF Mode with Centre-Subject Priority, where the camera
selects centre focus area, or Dynamic AF Mode, where you select the desired
focus area. When the focus mode is set to M (manual focus), you can select
either Centre Area Mode, where you focus manually using the centre focus
area, or Single Area Mode, where you focus manually using the selected
focus area.
Tip
Dynamic AF Mode with Closest-Subject Priority is useful when you want the camera to
take automatic control over focus operations, or when shooting a moving subject.
Dynamic AF Mode is useful in achieving focus on a particular part of a subject, or
when the composition of the photograph is your top priority.
Rotate AF Area mode selector to select AF Area mode.
• When the focus mode is set to AF (autofocus),
Dynamic AF Mode with Closest-Subject Priority is
selected with the AF Area mode selector set to
(except in
Mode with Centre-Subject Priority is selected with
the AF Area mode selector set to
AF Mode with the AF Area mode selector set to
focus), Centre Area Mode is selected with the AF
Area mode selector set to either
Single Area Mode with the AF Area mode selector
set to
• All five focus areas are displayed in the LCD panel
when Dynamic AF Mode with Closest-Subject
Priority is selected. When a subject is in-focus,
focus brackets located at in-focus subject is
highlighted momentarily with the Vari-Brite display
(p. 9) in the viewfinder.
46
Vari-Program, p. 36), Dynamic AF
, and Dynamic
. When the focus mode is set to M (manual
or
.
When focus mode is set to Autofocus
: Dynamic AF Mode with Closest-Subject Priority
Dynamic AF Mode with Closest-Subject Priority automatically maintains focus on the
subject located closest to any of five focus areas and focus is locked once it is
achieved*. The focus area of the subject is in focus is highlighted with the Vari-Brite
display (p. 9). If the subject moves from the selected focus area, the camera
automatically focuses on the subject determining the data from the other focus areas.
: Dynamic AF Mode with Centre-Subject Priority
Dynamic AF Mode with Centre-Subject Priority automatically maintains focus on the
subject located at centre focus areas and focus is locked once it is achieved*. If the
subject moves from the centre focus area, the camera automatically focuses on the
subject determining the data from the other focus areas. Centre focus area is
highlighted with the Vari-Brite display (p. 9).
: Dynamic AF Mode
Focus is obtained at the selected focus area and focusing is locked (as long as the
shutter release button is lightly pressed) once it is achieved*. If the subject moves
from the selected focus area, the camera automatically focuses on the subject
determining the data from the other focus areas. Selected focus area is highlighted
with the Vari-Brite display (p. 9).
* In Continuous Servo AF, focus is not locked and camera continuously focuses on
the subject (see page 44).
When focus mode is set to Manual
/ : Centre Area Mode
Focus is obtained only at the centre focus area when the AF Area mode selector is
set to either
highlighted with the Vari-Brite display (p. 9).
: Single Area Mode
, and Focus is obtained only at the selected focus area when using the manual focus.
Selected focus area is highlighted with the Vari-Brite display (p. 9).
or and when using the manual focus. Centre focus area is
www.mynikon.com.pl
47