Download Print this page

Viking RDDB301SS Installation Manual page 3

Built-in dishwashers
Hide thumbs Also See for RDDB301SS:

Advertisement

Please Read and ollow!
W A R N I N G
Disconnect the electrical power supply and
place a tag at the disconnect switch
• Electrically ground dishwasher.
indicating that you are working on the
• Connect ground wire to green ground
circuit.
connector in terminal box.
• DO NOT use an extension cord.
• Failure to follow these instructions, can
result in death, fire or electrical shock.
W A R N I N G
DO NOT use dishwasher until
completely installed.
DO NOT push down on open door.
• Doing so can result in serious injury
or cuts.
W A R N I N G
Use two or more people to move and
install dishwasher. Failure to do so can
result in back or other injury.
W A R N I N G
Plumbing connections must comply with
applicable sanitary, safety, and plumbing
codes.
C A U T I O N
The dishwasher has a factory installed
backflow preventer. DO NOT add an
additional check valve.
W A R N I N G
W A R N I N G
Be sure electrical power is turned off at
circuit breaker or fuse box before servicing
or installing unit. DO NOT use an
extension cord for this appliance.
W A R N I N G
Improper connection of the equipment –
grounding conductor can result in a risk of
electric shock. Check with a qualified
electrician or serviceman if you are in
doubt as to whether the appliance is
properly grounded. DO NOT modify the
plug provided with the appliance; if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
Please Read and ollow

Advertisement

loading

This manual is also suitable for:

Rddb201ssD3 201 seriesD3 301 series